On 02/09/11 18:33, Emmett Culley wrote: > Yup, looks like I am trying to load the wrong driver. I assumed that if the driver loaded it found the hardware. > > [root at bus ~]# for BUSID in $(/sbin/lspci | awk '{ IGNORECASE=1 } /net/ { print $1 }'); do /sbin/lspci -s $BUSID -m; /sbin/lspci -s $BUSID -n; done > 01:00.0 "Network controller" "RaLink" "RT2860" "ASUSTeK Computer Inc." "Device 130f" > 01:00.0 0280: 1814:0781 > 02:00.0 "Ethernet controller" "Intel Corporation" "82574L Gigabit Network Connection" "Super Micro Computer Inc" "Device 10d3" > 02:00.0 0200: 8086:10d3 > 03:00.0 "Ethernet controller" "Intel Corporation" "82574L Gigabit Network Connection" "Super Micro Computer Inc" "Device 10d3" > 03:00.0 0200: 8086:10d3 > > I'll get the correct driver. > > Also, this is a specialized server, so network manager is not an option. Plus, the wireless card will be configured as an access point and I don't believe NM will allow me ot configure it that way. > > Emmett Confirmed, it's kmod-rt2860sta you want. $ grep -i 1814 /lib/modules/*/modules.alias | grep -i 0781 /lib/modules/2.6.18-128.el5/modules.alias:alias pci:v00001814d00000781sv*sd*bc*sc*i* rt2860sta /lib/modules/2.6.18-164.el5/modules.alias:alias pci:v00001814d00000781sv*sd*bc*sc*i* rt2860sta /lib/modules/2.6.18-194.el5/modules.alias:alias pci:v00001814d00000781sv*sd*bc*sc*i* rt2860sta /lib/modules/2.6.18-238.el5/modules.alias:alias pci:v00001814d00000781sv*sd*bc*sc*i* rt2860sta /lib/modules/2.6.18-274.el5/modules.alias:alias pci:v00001814d00000781sv*sd*bc*sc*i* rt2860sta /lib/modules/2.6.18-53.el5/modules.alias:alias pci:v00001814d00000781sv*sd*bc*sc*i* rt2860sta /lib/modules/2.6.18-8.el5/modules.alias:alias pci:v00001814d00000781sv*sd*bc*sc*i* rt2860sta /lib/modules/2.6.18-92.el5/modules.alias:alias pci:v00001814d00000781sv*sd*bc*sc*i* rt2860sta Set up elrepo as described on the homepage here: http://elrepo.org then install the driver with: yum install kmod-rt2860sta yum will pull in the required firmware package as a dependency. Hope that helps.