On Fri, Apr 13, 2012 at 12:19 PM, Paul A <razor at meganet.net> wrote: > I have an old dell 2450 that was running kernel 2.6.18-308.1.1.el5 I then > upgraded it via yum to 2.6.18-308.1.1.el5. Now when the server boots to the > new kernel, 2.6.18-308.1.1.el5 it hangs on "starting iSCSI" and the weird > thing is when I tried to switch back to the older 2.6.18-308.1.1.el5 kernel > it works fine but the network script fails to start. I'm not really sure > what I should do, if someone can give me an idea on what I need to do to fix > the iSCSId issue on the new kernel or revert back to the old kernel and fix > the network issue. The odd thing is both kernel load the e100 network driver > but on the older kernel I can get the network script to start. > > I would appreciate some help. Do you need iscsi? If not, boot with the old kernel, and disable iscsi # chkconfig --list | grep iscsi (will probably show iscsi and iscsid) Then # chkconfig iscsi off # chkconfig iscsid off Then reboot with the new kernel. -- Dale Dellutri