[CentOS] upgrade issue

[Paul A]

I'm running Raid with scsi disks so I'm assuming it's needed correct?

-----Original Message-----
From: centos-bounces at centos.org [mailto:centos-bounces at centos.org] On Behalf
Of Dale Dellutri
Sent: Friday, April 13, 2012 1:32 PM
To: CentOS mailing list
Subject: Re: [CentOS] upgrade issue

On Fri, Apr 13, 2012 at 12:19 PM, Paul A <razor at meganet.net> wrote:
> I have an old dell 2450 that was running kernel 2.6.18-308.1.1.el5 I 
> then upgraded it via yum to 2.6.18-308.1.1.el5. Now when the server 
> boots to the new kernel, 2.6.18-308.1.1.el5 it hangs on "starting 
> iSCSI" and the weird thing is when I tried to switch back to the older 
> 2.6.18-308.1.1.el5 kernel it works fine but the network script fails 
> to start. I'm not really sure what I should do, if someone can give me 
> an idea on what I need to do to fix the iSCSId issue on the new kernel 
> or revert back to the old kernel and fix the network issue. The odd 
> thing is both kernel load the e100 network driver but on the older kernel
I can get the network script to start.
>
> I would appreciate some help.

Do you need iscsi?  If not, boot with the old kernel, and disable iscsi

# chkconfig --list | grep iscsi
(will probably show iscsi and iscsid)

Then
# chkconfig iscsi off
# chkconfig iscsid off

Then reboot with the new kernel.

--
Dale Dellutri
_______________________________________________
CentOS mailing list
CentOS at centos.org
http://lists.centos.org/mailman/listinfo/centos