On 8/10/12 5:50 PM, Stephen Harris wrote:
> On Fri, Aug 10, 2012 at 05:24:12PM -0700, Alan Batie wrote:
>> IPV6_DEFROUTE=yes
>
> Not sure where you get that from.
That's not something normally in our configs, I think it was in the
default config the centos 6 installer created, and I only stripped out
some of the excess... stuff like that I left in in case it mattered in 6
for some reason... The config on the working centos 5 systems (which is
what we use on the centos 6 systems also) is much simpler:
<ns6.peak.org> [113] # cat /etc/sysconfig/network
NETWORKING=yes
NETWORKING_IPV6=yes
HOSTNAME=ns6.peak.org
GATEWAY=207.55.16.1
<ns6.peak.org> [114] # cat /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth0
BOOTPROTO=static
BROADCAST=207.55.19.255
IPADDR=207.55.16.53
NETMASK=255.255.252.0
ONBOOT=yes
TYPE=Ethernet
IPV6INIT=yes
IPV6ADDR=2607:f678::56
IPV6_DEFAULTGW=2607:f678::1
> FWIW you can see the current routing table with "ip -6 route".
netstat is the one I usually use:
<centos666.peak.org> [39] # ip -6 router
Object "router" is unknown, try "ip help".
<centos666.peak.org> [40] # netstat -rn -A inet6
Kernel IPv6 routing table
Destination Next Hop
Flags Metric Ref Use Iface
2607:f678::/64 ::
U 256 1 0 eth0
fe80::/64 ::
U 256 0 0 eth0
::/0 2607:f678::1
UG 1 5 0 eth0
::1/128 ::
U 0 1 1 lo
2607:f678::16:66/128 ::
U 0 58 1 lo
fe80::250:56ff:fe98:708b/128 ::
U 0 0 1 lo
ff00::/8 ::
U 256 0 0 eth0