[CentOS] Ethernet puzzle

Ashley M. Kirchner ashley at pcraft.com
Fri Dec 28 20:40:46 UTC 2012


I decided to completely delete everything out of udev's rules file and
restart the system.  This brought up the devices in whatever discovered
order.  Then I modified the rules file to set them in the correct order
(simply by changing the NAME= key) and rebooted again.

Now they're all coming up in the order in which I set them.  The mystery
MAC hasn't reappeared either.  It seems to only be present immediately
after the install.  I've now rebooted three times to make sure the
definitions stick.  So far so good.

While this has solved the problem, it still doesn't explain the mystery
MAC.  but, I'm willing to concede that we will never find out where it came
from.


On Fri, Dec 28, 2012 at 1:07 PM, Ashley M. Kirchner <ashley at pcraft.com>wrote:

> BIOS lists one device.
>
> Motherboard does not have an interface card.
>
> No fiber optic.
>
> No BNC connector.
>
> I commented out the "ghost" MAC address from udev's rules file and
> rebooted.  It has not reappeared.  However, the problem I have is that the
> ethernet ports don't stick in the same order.  They came up in a completely
> different order.  I now have eth0, 1, and 4.  What was eth0 prior to the
> reboot is now ... uh ... 'rename4' according to the udev messages:
>
> udev: renamed network interface eth0 to rename2  (this is the Intel Pro
> 100 add-in card [e100 module])
> udev: renamed network interface eth1 to eth0  (this is the SMC1255TX
> add-in card [tulip module])
> udev: renamed network interface rename2 to eth1
> udev: renamed network interface eth2 to rename4  (this is the motherboard
> ethernet port [VIA Rhine module])
>
> What gives??  How can I tell it to either stop mucking with them, or to do
> it in the order I want it to:
> on-board: eth0
> Intel: eth1
> SMC: eth2
>
>
>
> On Fri, Dec 28, 2012 at 12:30 PM, Dale Dellutri <daledellutri at gmail.com>wrote:
>
>> On Fri, Dec 28, 2012 at 12:56 PM, Ashley M. Kirchner <ashley at pcraft.com>
>> wrote:
>> > But it is.  The MAC address on the motherboard port is NOT the same as
>> the
>> > mystery device.  And it DOES match one of the entries in udev's rules,
>> and
>> > it's operational right now as eth0 (as it should be.)  However, the
>> mystery
>> > MAC address that's listed in udev's rules matches nothing in either
>> lshw or
>> > lspci.
>> >
>> > Remember, udev's rules lists FOUR devices.  There are only THREE.
>>
>> What does the BIOS say about ethernet devices?
>>
>> Does the motherboard have a management interface card with its own
>> ethernet port, perhaps potential but not actually installed?
>>
>> Is there a fiber-optics connector on the system which is coming up as
>> an ethernet port?
>>
>> Is one of the cards old enough to still have a separate BNC connector?
>>
>> > On Fri, Dec 28, 2012 at 11:36 AM, Frank Cox <
>> theatre at melvilletheatre.com>wrote:
>> >
>> >> On Fri, 28 Dec 2012 11:21:22 -0700
>> >> Ashley M. Kirchner wrote:
>> >>
>> >> > Yeah, rpmforge or repoforge.  But, I'm looking for what exactly?  It
>> only
>> >> > lists a single ethernet port (the built-in one).
>> >>
>> >> That's what you're looking for.  Now you know that the mysterious
>> device
>> >> isn't
>> >> something that you didn't know aobout on the motherboard.
>> >>
>> >> --
>> >> MELVILLE THEATRE ~ Real D 3D Digital Cinema ~ www.melvilletheatre.com
>> >> www.creekfm.com - FIFTY THOUSAND WATTS of POW WOW POWER!
>> >> _______________________________________________
>> >> CentOS mailing list
>> >> CentOS at centos.org
>> >> http://lists.centos.org/mailman/listinfo/centos
>> >>
>> >>
>> > _______________________________________________
>> > CentOS mailing list
>> > CentOS at centos.org
>> > http://lists.centos.org/mailman/listinfo/centos
>>
>>
>>
>> --
>> Dale Dellutri
>> _______________________________________________
>> CentOS mailing list
>> CentOS at centos.org
>> http://lists.centos.org/mailman/listinfo/centos
>>
>>
>



More information about the CentOS mailing list