On 01/03/2012 02:15 AM, fakessh @ wrote: > > Le mardi 03 janvier 2012 à 02:02 +0100, fakessh a écrit : >> Le 2012-01-03 00:15, Ljubomir Ljubojevic a écrit : >>> On 01/02/2012 09:58 PM, fakessh wrote: >>>> I am writing to report a problem I encounter with my wireless card >>>> realtek 8150 >>>> the installer does not detect the device so the >>>> /etc/sysconfig/network-script/ifcfg-wlan0 is absent >>>> >>> >>> Realtek 8150 is USB LAN NIC, not the wireless one. Drivers for it are >>> already inside the Kernel: >>> >>> >>> http://www.realtek.com/products/productsView.aspx?Langid=1&PNid=14&PFid=8&Level=5&Conn=4&ProdID=21 >>> >>> >>> Please post output of the 'lspci -v" command, mainly those device >>> without anything in "Kernel driver in use:" (or do not have that line >>> at >>> all). >> >> >> this my output >> root at localhost ~]# lspci -v | egrep Ethernet >> 00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2) >> 01:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8185 >> IEEE 802.11a/b/g Wireless LAN Controller (rev 20) So it is not RTL-8150, but RTL-8185 >> >> I connect with the ethernet port but I can not turn on the wireless >> card >> >> all testimonials are welcome > > > the card appears sold as a wireless trendnet TEW 423PI The chip is all we should need. Next we is DeviceID so we can match it. run: lspci -n | grep '01:06.0' -- Ljubomir Ljubojevic (Love is in the Air) PL Computers Serbia, Europe Google is the Mother, Google is the Father, and traceroute is your trusty Spiderman... StarOS, Mikrotik and CentOS/RHEL/Linux consultant