[CentOS] probleme with my wifi card on centos 6

fakessh fakessh at fakessh.eu
Wed Jan 4 19:28:41 UTC 2012


Le 2012-01-04 17:22, Ljubomir Ljubojevic a écrit :
> On 01/04/2012 02:58 AM, fakessh wrote:
>> Le 2012-01-04 01:48, Ljubomir Ljubojevic a écrit :
>>> On 01/03/2012 10:14 PM, fakessh wrote:
>>>> So I think do a post on the bugtracker of elrepo to ask
>>>> the creation of a new kmod-*
>>>>
>>>> So I tried to compile the driver provided
>>>> in [1]
>>>>
>>>> module appears to load properly
>>> When you run lspci -v, it shows something like:
>>>
>>> 	Kernel driver in use: rtl8185
>>> 	Kernel modules: rtl8185
>>>
>>> ???
>>
>> lspci -v does not send me what I want
>>
>> this my output
>> root at localhost swilting]# lspci -v | egrep Kernel
>> Kernel driver in use: nForce2_smbus
>> Kernel modules: i2c-nforce2
>> Kernel driver in use: ohci_hcd
>> Kernel driver in use: ehci_hcd
>> Kernel driver in use: HDA Intel
>> Kernel modules: snd-hda-intel
>> Kernel driver in use: forcedeth
>> Kernel modules: forcedeth
>> Kernel driver in use: sata_nv
>> Kernel modules: sata_nv
>> Kernel driver in use: sata_nv
>> Kernel modules: sata_nv
>> Kernel driver in use: nouveau
>> Kernel modules: nouveau, nvidiafb
>> Kernel driver in use: k10temp
>> Kernel modules: k10temp
>> Kernel modules: r8185b
>>
>> Kernel driver in use: is missing
>>
>> 01:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. 
>> RTL-8185
>> IEEE 802.11a/b/g Wireless LAN Controller (rev 20)
>> 	Subsystem: Realtek Semiconductor Co., Ltd. RTL-8185 IEEE 
>> 802.11a/b/g
>> Wireless LAN Controller
>> 	Flags: medium devsel, IRQ 16
>> 	I/O ports at bc00 [size=256]
>> 	Memory at fde00000 (32-bit, non-prefetchable) [size=1K]
>> 	Kernel modules: r8185b
>>
>>
>>
>>>
>>>> Still I have failed to create the wireless interface
>>>> despite my attempts with the file ifcfg-wlan0  tape provided I
>>>> to try to load ifup the interface without success
>>>
>>> Why do you manually edit that file? Have you tried if 
>>> NetworkManager
>>> or
>>> "system-config-network-tui" command (package has the same name) see
>>> the
>>> interface?
>>
>> I am completely lost and I do not know how
>>
>> please help me
>
> Somebody else should step in. I never had similar problem before. My
> NIC/wireless just works with stock kernel drivers.
>
> What I can tell you is to (re)move manually made "ifcfg-*" file and 
> run
> "yum install system-config-network-tui" and then run command
> "system-config-network-tui" as root. In "Device configuration" there
> should be
> option to set up some kind of wireless NIC (name does not have to be 
> wlan).


the problem seems weird but the output of lspci -v | egrep Kernel shows 
that there is a problem

I have tried to create the interface with graphical tools and command 
line without success
I never managed to run this card with all Linux systems available that 
i tried

sincerely ...



-- 
  http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x092164A7
  gpg --keyserver pgp.mit.edu --recv-key 092164A7

  http://urlshort.eu fakessh @
  http://gplus.to/sshfake
  http://gplus.to/sshswilting
  http://gplus.to/john.swilting



More information about the CentOS mailing list