On 6/20/2012 9:34 AM, Gregory P. Ennis wrote: > > I have been chasing a problem with a pci-e TrendNet(TEG-ECTX) gigabit > card. After adding the card to a machine with a new Centos 6.2 install > and naming it 'eth4' it works well for 6 to 12 hours and then fails. Try moving the network card to a new slot, especially if you can swap the network card with another card which is known to work. Also, try swapping the card into a spare server. If the problem follows the network card, then the card is probably bad. If a known-good card misbehaves in the slot where you previously had the network card, then the slot may be bad as well. -- -Chris Nothing in this message is intended to make or accept an offer or to form a contract, except that an attachment that is an image of a contract bearing the signature of an officer of our company may be or become a contract. This message (including any attachments) is intended only for the use of the individual or entity to whom it is addressed. It may contain information that is non-public, proprietary, privileged, confidential, and exempt from disclosure under applicable law or may constitute as attorney work product. If you are not the intended recipient, we hereby notify you that any use, dissemination, distribution, or copying of this message is strictly prohibited. If you have received this message in error, please notify us immediately by telephone and delete this message immediately. Thank you.