Hi, Steve, Steve Brooks wrote: > On Fri, 22 Jun 2012, Steve Brooks wrote: >> On Fri, 22 Jun 2012, m.roth at 5-cent.us wrote: >>> Steve Brooks wrote: >>>> On Fri, 22 Jun 2012, m.roth at 5-cent.us wrote: >>>>> Steve Brooks wrote: >>>>>> On Fri, 22 Jun 2012, m.roth at 5-cent.us wrote: >>>>>>> Steve Brooks wrote: >>>>>>>> >>>>>>>> I have a SATA PCIe 6Gbps 4 port controller card made by Startech. >>>>>>>> The kernel (Linux viz1 2.6.32-220.4.1.el6.x86_64) sees it as >>>>>>>> >>>>>>>> Marvell Technology Group Ltd. 88SE9123 >>>>>>>> >>> Is this your card? >> >> Yes that is the very card, the page says the chipset is Marvell 88SE9128 >> but "lspci" shows >> >> Marvell Technology Group Ltd. 88SE9123 PCIe SATA 6.0 Gb/s controller > > It is odd because the kernel reports it as "88SE9123" the web page says it > is "88SE9128" as does the manual supplied with the card. Now the Yeah, I noticed that too, and thought it odd. <snip> I looked at the "manual", and the only thing that came to mind was to try going into the BIOS and making sure that it was set to AHCI rather than, say, IDE, or whatever. mark