On Sat, May 12, 2012 at 9:56 AM, Gregory P. Ennis <PoMec at pomec.net> wrote: > Dear List, > > I am still having difficulty installing a second ethernet card in a new > CentOS 6.2 install. Tom Bishop was kind enough to give me an excellent > link to figure out how to change the device names the way I need to have > them. It looks to me that CentOS is recognizing the st1000spex card > from StarTech but I am unable to get data to go in or out of it. > > The StarTech manual for this card does not include linux as being > supported, but several vendors do have their blurbs with linux support > caveats. Unfortunately, the StarTech site appears down today, and I > have not been able to see if they have documentation as to whether there > is a need for special linux drivers. > > Do any of you have a StarTech st1000spex, or any suggestions? > > Thanks, > > Greg Ennis > > > > _______________________________________________ > CentOS mailing list > CentOS at centos.org > http://lists.centos.org/mailman/listinfo/centos Please include the lspci output. I can access Startech's website and it says it's a Realtek - RTL8111DL based chip, so you'd better start googling about that chipset under CentOS. ----------------------------------------- Victor, Thanks for your help. Looks like StarTech is up for me too now. I do not have lspci on my system, and could not yum install it, did you mean lsmod? If so here is the output for lsmod : [root at Mail ~]# lsmod Module Size Used by ipt_REDIRECT 1840 1 iptable_nat 6158 1 nf_nat 22726 2 ipt_REDIRECT,iptable_nat ipt_LOG 5845 5 xt_limit 2182 1 autofs4 26888 3 sunrpc 243918 1 target_core_iblock 8228 0 target_core_file 7746 0 target_core_pscsi 14016 0 target_core_mod 286584 3 target_core_iblock,target_core_file,target_core_pscsi configfs 29821 2 target_core_mod bnx2fc 120622 0 cnic 53443 1 bnx2fc uio 10974 1 cnic fcoe 20748 0 libfcoe 39661 2 bnx2fc,fcoe 8021q 23575 0 libfc 105924 3 bnx2fc,fcoe,libfcoe garp 7344 1 8021q stp 2173 1 garp llc 5642 2 garp,stp scsi_transport_fc 52241 3 bnx2fc,fcoe,libfc scsi_tgt 12173 1 scsi_transport_fc cpufreq_ondemand 10448 4 powernow_k8 18090 0 freq_table 4881 2 cpufreq_ondemand,powernow_k8 mperf 1557 1 powernow_k8 cachefiles 37180 1 fscache 46859 1 cachefiles ipt_REJECT 2383 0 nf_conntrack_ipv4 9506 7 iptable_nat,nf_nat nf_defrag_ipv4 1483 1 nf_conntrack_ipv4 iptable_filter 2793 1 ip_tables 17831 2 iptable_nat,iptable_filter ip6t_REJECT 4628 2 nf_conntrack_ipv6 8748 2 nf_defrag_ipv6 12182 1 nf_conntrack_ipv6 xt_state 1492 6 nf_conntrack 79453 5 iptable_nat,nf_nat,nf_conntrack_ipv4,nf_conntrack_ipv6,xt_state ip6table_filter 2889 1 ip6_tables 19458 1 ip6table_filter ipv6 322125 92 cnic,ip6t_REJECT,nf_conntrack_ipv6,nf_defrag_ipv6 uinput 8216 0 sg 30124 0 microcode 112594 0 serio_raw 4818 0 i2c_piix4 12608 0 r8169 40000 0 mii 5271 1 r8169 xhci_hcd 126325 0 snd_hda_codec_realtek 309541 0 snd_hda_codec_hdmi 24682 1 snd_hda_intel 25548 2 snd_hda_codec 91845 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel snd_hwdep 6780 1 snd_hda_codec snd_seq 56591 0 snd_seq_device 6596 1 snd_seq snd_pcm 84702 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_timer 23057 2 snd_seq,snd_pcm snd 70023 13 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_seq,snd_seq_device,snd_pcm,snd_timer soundcore 8086 1 snd snd_page_alloc 8662 2 snd_hda_intel,snd_pcm ext4 364410 6 mbcache 8144 1 ext4 jbd2 88834 1 ext4 sr_mod 16228 0 cdrom 39803 1 sr_mod sd_mod 39520 3 crc_t10dif 1541 1 sd_mod usb_storage 49452 0 wmi 6287 0 ahci 40455 2 radeon 1023391 0 ttm 70328 1 radeon drm_kms_helper 33236 1 radeon drm 230707 3 radeon,ttm,drm_kms_helper i2c_algo_bit 5762 1 radeon i2c_core 31276 5 i2c_piix4,radeon,drm_kms_helper,drm,i2c_algo_bit dm_mirror 14101 0 dm_region_hash 12170 1 dm_mirror dm_log 10122 2 dm_mirror,dm_region_hash dm_mod 81692 20 dm_mirror,dm_log It is interesting in that the nic interface on the mother board is listed as : Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit The nic interface on the mother board works fine. Based on this I would have expected the st1000spex to work perfectly. The mmi entry is listed as R8169 for lsmod output, I am not really sure what this means. Greg