[CentOS] True bond howto for Centos 6

aurfalien aurfalien at gmail.com
Sun May 13 17:04:17 UTC 2012


On May 13, 2012, at 12:54 PM, bob wrote:

> On 5/13/2012 12:30 PM, aurfalien wrote:
>> On May 13, 2012, at 12:23 PM, bob wrote:
>> 
>>> On 5/13/2012 11:45 AM, aurfalien wrote:
>>>> Hi all,
>>>> 
>>>> Read many posts on the subject.
>>>> 
>>>> Using 802.3ad.
>>>> 
>>>> Few problems;
>>>> Cannot ping some hosts on the network, they are all up.
>>>> Cannot resolve via DNS which is one of the hosts that I cannot ping, internal nor external DNS hosts.
>>>> Unplugging the NICS and plugging them back in will then not allow pining if the default d=gateway.
>>>> 
>>>> When cold booting it somewhat works, some hosts are pingable while others are not.
>>>> 
>>>> When restarting the network service via /etc/init.d/network, nothing is pingable.
>>>> 
>>>> Here are my configs;
>>>> 
>>>> ifcfg-bond0
>>>> DEVICE=bond0
>>>> USERCTL=no
>>>> BOOTPROTO=none
>>>> ONBOOT=yes
>>>> IPADDR=10.0.0.10
>>>> NETMASK=255.255.0.0
>>>> NETWORK=10.0.0.0
>>>> TYPE=Unknown
>>>> IPV6INIT=no
>>>> 
>>>> ifcfg-eth0
>>>> DEVICE=eth0
>>>> BOOTPROTO=none
>>>> ONBOOT=yes
>>>> MASTER=bond0
>>>> SLAVE=yes
>>>> USERCTL=no
>>>> 
>>>> ifcfg-eth1
>>>> DEVICE=eth1
>>>> BOOTPROTO=none
>>>> ONBOOT=yes
>>>> MASTER=bond0
>>>> SLAVE=yes
>>>> USERCTL=no
>>>> 
>>>> /etc/modprob.d/bonding.conf
>>>> alias bond0 bonding
>>>> options bond0 mode=5 miimon=100
>>>> 
>>>> Bonding worked great in Centos 5.x, not so well for me in Centos 6.2.
>>>> 
>>>> My goal is to get this working under bridging for KVM, I can only imagine the nightmare seeing I can't get a simple bond to work!
>>>> 
>>>> Any guidance is golden.
>>>> 
>>>> - aurf
>>>> 
>>>> _______________________________________________
>>>> CentOS mailing list
>>>> CentOS at centos.org
>>>> http://lists.centos.org/mailman/listinfo/centos
>>>> 
>>>> 
>>> I spent two months on bonding two nics inside a box to a bridge in the box.
>>> There is a bug, very prominent in fedora bugzillas about it.
>>> You cannot do it without some modification. Libvirt loses some vms, no
>>> way to make it work that I know of
>>> except for those suggested changes which I did not try.
>>> 
>>> if you look in your libvirt logs you will see xml bond errors....and
>>> thus impossible to do inside of the box.
>>> this only applies if the bonded nics and bridge are all in the same box,
>>> 
>>> also, the options should no longer go in bonding.conf, but in the bridge
>>> file itself.
>>> 
>>> in all my testing all vms worked except the one assigned vnet0, that
>>> always got 'lost'...
>>> however, any attempt by the vm to send a signal outside to the net,
>>> would cause it to be found again..
>>> 
>>> this bug is not fixed in 6 or in latest fedora when i last
>>> checked....there are self made patches in fedora bugzilla though.
>> Hi Bob,
>> 
>> WOW, ok cool.
>> 
>> I will simply do 2 bridges and allocate some of my guests to either for a sort of manual load balancing.
>> 
>> Good info to know.
>> 
>> Really appreciate the feedback.
>> 
>> - aurf
>> _______________________________________________
>> CentOS mailing list
>> CentOS at centos.org
>> http://lists.centos.org/mailman/listinfo/centos
>> 
>> 
> and dont forget a lot of the bond modes require a second device like a 
> switch...i think 0 and 6 were the ones I tried
> 
> I really wanted the bond, but decided to blow some ips and just use 
> extra bridges to try to balance.
> It was not fun at all finding this bug...lol
> 
> I think the reason they do not want to get into it is alomost everyone 
> uses bond/bridges outside of the single server and it is not an 
> issue...and to rewrite and debug all that for a few of us that are crazy 
> to do such single box bridge bond, well, we in't gonna see that 
> according to the bugzilla responses I saw...still, one can hope


Thats a real bummer.

I don't get why they think this.

I mean whats so strange for one to bond interfaces anyways on a system?  Oh well, multi bridges are fine for me. 

Funny, my Blow Leopard (OSX 10.6.8) and Cryin (OSX 10.7) Servers trunk fine with my Foundry switch at 802.3ad.
 
- aurf


> _______________________________________________
> CentOS mailing list
> CentOS at centos.org
> http://lists.centos.org/mailman/listinfo/centos




More information about the CentOS mailing list