From: "m.roth at 5-cent.us" <m.roth at 5-cent.us> > Good idea, though, and I just installed OpenIPMI and ipmitool... and the > only thing that ipmitool sel list shows is a power supply failure > yesterday. I did go into the datacenter and look at it, and it's got this > cute pull-out little display... and it's not showing any of the DIMMs as > failing, which goes with the results of > cat /sys/devices/system/edac/mc/mc0/csrow*/*count *all* giving me zero, > though /sys/devices/system/edac/mc/mc0/ce_count shows 20260 and rising. Install the hp-health tools, and use hplog to get more info Might need to install compat-libstdc++, and temporarily put back the default '/etc/redhat-release' And, if you do not have them already, there is: hpdiags, hpacucli, hpadu, hponcfg For your DIMM problem, you could try the hp-health www interface (I never use that, but I think there are some tests options there) or I would just boot on SmartStart and do a ram check. JD