op 19-12-13 12:23, wwp schreef: > Hello Johan, > > > On Thu, 19 Dec 2013 12:08:17 +0100 Johan Vermeulen <jvermeulen at cawdekempen.be> wrote: > >> Dear All, >> >> I'm having trouble on 2 laptops Lenovo B580 since upgrading to Centos6.5. >> ( Because it's a Lenovo I cannot switch the network card for a better >> supported network card. ) >> >> There on the latest kernel : >> >> root at jac network-scripts]# uname -a >> Linux jac.cawdekempen 2.6.32-431.1.2.0.1.el6.x86_64 #1 SMP Fri Dec 13 >> 13:06:13 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux >> >> >> With the help of the Elrepo Broadcom page I got the driver and that part >> works fine. >> The network card works : >> >> # vi /etc/udev/rules.d/70-persistent-net.rules >> # PCI device 0x14e4:0x4727 (wl) >> SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", >> ATTR{address}=="c0:14:3d:c1:f6:ef", ATTR{type}=="1", KERNEL=="eth*", >> NAME="eth1" >> >> # uname -a >> eth1 Link encap:Ethernet HWaddr C0:14:3D:C1:F6:EF >> inet6 addr: fe80::c214:3dff:fec1:f6ef/64 Scope:Link >> UP BROADCAST MULTICAST MTU:1500 Metric:1 >> RX packets:0 errors:0 dropped:0 overruns:0 frame:651 >> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 >> collisions:0 txqueuelen:1000 >> RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) >> Interrupt:17 >> >> >> >> >> >> But I cannot connect to any wireless network with neither of the machines. >> >> I click on the gnome-nm-applet and type in the password. >> >> [root at jac network-scripts]# tail -f /var/log/messages >> Dec 19 11:10:17 jac NetworkManager[2148]: <info> Config: added >> 'scan_ssid' value '1' >> Dec 19 11:10:17 jac NetworkManager[2148]: <info> Config: added >> 'key_mgmt' value 'WPA-PSK' >> Dec 19 11:10:17 jac NetworkManager[2148]: <info> Config: added 'psk' >> value '<omitted>' >> Dec 19 11:10:17 jac NetworkManager[2148]: <info> Config: added 'group' >> value 'TKIP CCMP' >> Dec 19 11:10:17 jac NetworkManager[2148]: <info> Activation (eth1) Stage >> 2 of 5 (Device Configure) complete. >> Dec 19 11:10:17 jac NetworkManager[2148]: <info> Config: set interface >> ap_scan to 1 >> Dec 19 11:10:17 jac NetworkManager[2148]: <info> (eth1): supplicant >> connection state: inactive -> scanning >> Dec 19 11:10:18 jac NetworkManager[2148]: <info> (eth1): supplicant >> connection state: scanning -> associating >> Dec 19 11:10:28 jac NetworkManager[2148]: <info> (eth1): supplicant >> connection state: associating -> disconnected >> Dec 19 11:10:28 jac NetworkManager[2148]: <info> (eth1): supplicant >> connection state: disconnected -> scanning >> Dec 19 11:10:29 jac NetworkManager[2148]: <info> (eth1): supplicant >> connection state: scanning -> associating >> Dec 19 11:10:39 jac NetworkManager[2148]: <info> (eth1): supplicant >> connection state: associating -> disconnected >> Dec 19 11:10:39 jac NetworkManager[2148]: <info> (eth1): supplicant >> connection state: disconnected -> scanning >> Dec 19 11:10:40 jac NetworkManager[2148]: <info> (eth1): supplicant >> connection state: scanning -> associating >> Dec 19 11:10:42 jac NetworkManager[2148]: <warn> Activation >> (eth1/wireless): association took too long. >> Dec 19 11:10:42 jac NetworkManager[2148]: <info> (eth1): device state >> change: 5 -> 6 (reason 0) >> Dec 19 11:10:42 jac NetworkManager[2148]: <warn> Activation >> (eth1/wireless): asking for new secrets >> Dec 19 11:10:42 jac NetworkManager[2148]: <warn> Couldn't disconnect >> supplicant interface: Method "Disconnect" with signature "" on interface >> "fi.epitest.hostap.WPASupplicant.Interface" doesn't exist#012. >> Dec 19 11:10:42 jac NetworkManager[2148]: <warn> Couldn't disconnect >> supplicant interface: Method "Disconnect" with signature "" on interface >> "fi.epitest.hostap.WPASupplicant.Interface" doesn't exist#012. >> Dec 19 11:10:42 jac NetworkManager[2148]: <info> (eth1): supplicant >> connection state: associating -> disconnected >> Dec 19 11:10:43 jac NetworkManager[2148]: <info> (eth1): device state >> change: 6 -> 9 (reason 7) >> Dec 19 11:10:43 jac NetworkManager[2148]: <warn> Activation (eth1) >> failed for access point (Clive) >> Dec 19 11:10:43 jac NetworkManager[2148]: <info> Marking connection >> 'Auto Clive' invalid. >> Dec 19 11:10:43 jac NetworkManager[2148]: <warn> Activation (eth1) failed. >> Dec 19 11:10:43 jac NetworkManager[2148]: <info> (eth1): device state >> change: 9 -> 3 (reason 0) >> Dec 19 11:10:43 jac NetworkManager[2148]: <info> (eth1): deactivating >> device (reason: 0). >> >> googling for "centos6 WPASupplicant.Interface" doesn't exist#012" I >> found this bug: >> >> http://bugs.centos.org/view.php?id=5834 >> >> >> could this be the same issue? > Got the exact same problem after upgrading to CentOS 6.5, and I was not > the only one. The archives of this ML would bring you help, check the > thread I started: > Date: Tue, 10 Dec 2013 10:26:19 +0100 > From: wwp <subscript at free.fr> > To: centos at centos.org > Subject: [CentOS] Upgrade to CentOS 6.5 -> issue with Broadcom Wifi > > As suggested by contributors here, and as written at http://elrepo.org/tiki/wl-kmod, > I ended up installing the latest available driver by building the RPM > from the archive of the sources. The procedure is described at the link > above. > > > Regards, > Hello, thanks for the reply. I did build the driver, using wl-kmod-6_30_223_141-2.el6.elrepo.nosrc.rpm <http://elrepo.org/linux/elrepo/el6/SRPMS/wl-kmod-6_30_223_141-2.el6.elrepo.nosrc.rpm> and hybrid-v35_64-nodebug-pcoem-6_30_223_141.tar.gz This resulted in kmod-wl-6_30_223_141-2.el6.local.x86_64.rpm which I hope is the latest. This results in a working network card, so that part went fine. I guess the wpa_supplicant is maybe a different issue. Greetings, J.