Toby Bluhm wrote: > On 2/8/2013 2:26 PM, m.roth at 5-cent.us wrote: >> Toby Bluhm wrote: >>> On 2/8/2013 1:23 PM, m.roth at 5-cent.us wrote: >>>> Craig White wrote: >>>>> service apcupsd status >>>>> >>>>> (or cat /var/log/apcupsd.events) >>>>> >>>> Already posted the latter; the former, hey, neat results, excerpted >>>> here: >>>> MODEL : Smart-UPS 3000 RM >>>> STATUS : SHUTTING DOWN >>>> LINEV : 118.0 Volts >>>> LOADPCT : 55.9 Percent Load Capacity >>>> BCHARGE : 100.0 Percent >>>> TIMELEFT : 10.0 Minutes >>>> <...> >>>> TONBATT : 0 seconds >>>> CUMONBATT: 27 seconds >>>> >>> >>> You can specify in the conf file that shutdown occurs when it hits X >>> minutes of runtime left - "MINUTES" should be the parameter. You're at >>> 10.0 minutes left & if you have it set to something 10.0 or greater, >>> it's probably gonna want to shutdown immediately at any AC power loss. >> >> I'm afraid you've missed the whole beginning of this thread - I suggest >> you read it. I know what you were saying; it's the response of apcupsd >> to a power blip this morning that's the issue: as much as these servers >> draw,there's no way that the UPS is out of power in 3 seconds. > > I'm not saying it's out of battery power. I'm saying you may be telling > it to shutdown when it has, by it's own calculations, 10 minutes of > battery run time left. I believe the default is 3 or 5 in apcupsd.conf. Oh, sorry, you weren't clear. Nope, apcupsd.conf is at its default of MINUTES 3. mark