On Fri, Feb 15, 2013 at 3:16 PM, Todor Petkov <zakk at online.bg> wrote: > On 15/02/2013 09:08 PM, SilverTip257 wrote: > > Is anybody here monitoring Dell SAS6/iR RAID health? > > I have a mix of CentOS 5.9 and 6.3 installs on the PE1950s. > > > > I'm finding drivers and Megaraid Storage Manager downloads via LSI's > > site, > > but I'd prefer not to install a bunch of crapware. All I need is the > > proper LSI daemon which exports info via SNMP. > > > > I've used check_sasraid_megaraid Nagios script [0] in the past for > > PERC5i > > and PERC6i controllers in Dell PE2950s. For 2950s I've only had to > > install sas_snmp-3.11-0003.i386.rpm from LSI to get rolling. > > > > I've tried installing parts from the MSM zip/tarball mess to install > > only > > the lsi_mrdsnmpd daemon (lsi_mrdsnmpagent). > > > > PERC5i = LSI 8048e (megaraid) > > PERC6i = LSI SAS 1078 (megaraid) > > SAS6/iR = LSI SAS 1068e (mptfusion) > > > > [0] http://wleibzon.bol.ucla.edu/nagios/ > > [1] > > http://lists.centos.org/pipermail/centos/2009-November/085215.html > > > > > > Thanks for any nudges in the right direction. > > > You can try megasasctl from this package > http://sourceforge.net/projects/megactl/ and do some script, which is > used by snmpd to check the output. > > Thanks - I'll look into it. Not as nice as the lsi daemon though and having to re-author a Nagios script. > > > Regards, > > _______________________________________________ > CentOS mailing list > CentOS at centos.org > http://lists.centos.org/mailman/listinfo/centos > -- ---~~.~~--- Mike // SilverTip257 //