This is saying that the _driver_ is out of date, not the firmware of the RAID card. Post your kernel version. On 02/06/2013 03:50 AM, Rafał Radecki wrote: > Hi All. > > I am using dell firmware repository > (http://linux.dell.com/wiki/index.php/Repository/OMSA). To update all > firmware on my Dell PowerEdge R310 I use: > yum install $(bootstrap_firmware) > update_firmware --yes > and perform reboot. > Then the firmware for my PERC H200 RAID controller is "up to date" > with repository. When I make: > /opt/dell/srvadmin/bin/omreport storage controller > I get: > ... > Firmware Version : 07.03.05.00 > ... > Driver Version : 05.101.00.02 > Minimum Required Driver Version : 07.00.01.00-1 > ... > So my driver is actually out of date. > On page: https://www.dell.com/support/drivers/us/en/555/DriverDetails/Product/poweredge-r310?driverId=NX9T4&osCode=WS8R2&fileId=3126023528 > I see that SAS-RAID_Firmware_NX9T4_LN32_07.03.05.00_A08.BIN for RHEL > is available. It has a higher driver version than required > 07.00.01.00-1 so a manual download and install should be ok in this > case. > > Is the dell hardware repo serving old versions of firmware/drivers? > Should I in my case perform a manual update process? > > Best regards, > Rafal Radecki. > _______________________________________________ > CentOS mailing list > CentOS at centos.org > http://lists.centos.org/mailman/listinfo/centos > -- _____________________ Phil Gardner PGP Key ID 0xFECC890C OTR Fingerprint 6707E9B8 BD6062D3 5010FE8B 36D614E3 D2F80538