On Sun, Mar 3, 2013 at 11:02 PM, Ian Pilcher <arequipeno at gmail.com> wrote: > I updated my home server with the 6.4 CR packages, and I've experienced > 3 or 4 hard lockups since. The server is a fanless VIA C7 > "CentaurHauls" system with a 1GHz CPU underclocked to 800MHz and 1GB of > RAM. It has a dual-port Intel 82546GB NIC in its single PCI slot. (It > also has an on-board Realtek RTL-8110SC/8169SC NIC that is plugged in, > but doesn't currently have an IP address configured.) Well.. Looks like my hardware problems were only superficially the same as yours. After fighting it for two weeks, I got the second replacement motherboard in on Tuesday. Swapped it out and it has been rock solid stable since then. At some point I may try bringing up the BIOS to the same version as on the failed board if someone has a similar problem, but for now it's staying at the back rev version.