Norm Schklar On Thu, May 30, 2013 at 3:14 PM, John R Pierce <pierce at hogranch.com> wrote: > On 5/30/2013 9:18 AM, Norman Schklar wrote: > > I am aware of the 1.6tb. > > Only the four 1tb drives + DVD > > But I want to just stop the Raid all together. Looking for the "how to" > > turn off raid on boot. > > you need to know WHICH LSI logic raid controller this system has before > you can get a straight answer. the Megaraid 924x/926x/927x/928x stuff > is way different than the 920x/921x HBA stuff or the 97xx 3Ware based > stuff. like, COMPLETELY different. megaraid in particular is a pain to > configure but performs quite well. > > if its megaraid, they have an AWFUL 'web' style GUI in the BIOS, or a > megacli command line which is nearly as awful. in either one, you'd > need to DELETE the existing raid10 logical drive, then use the command > or gui to 'convert all unassigned drives to JBOD', which is something > like... > > megacli> cfgeachdskraid0a0 > > (where a0 is controller 0) > > -- > john r pierce 37N 122W > somewhere on the middle of the left coast > I pulled 3 of 4 drives. Restarted and it's loading Centos. Now I need to know how to setup the Linux Raid. Do I finish a complete server setup then modify the software raid, or do I need to do it on the front end? Thanks for the help. Norm > > _______________________________________________ > CentOS mailing list > CentOS at centos.org > http://lists.centos.org/mailman/listinfo/centos >