[CentOS] Newby using IntelR1304BB Need help with installing 6.4
Norman Schklar
norman at schklar.com
Thu May 30 23:59:35 UTC 2013
Norm Schklar
On Thu, May 30, 2013 at 3:14 PM, John R Pierce <pierce at hogranch.com> wrote:
> On 5/30/2013 9:18 AM, Norman Schklar wrote:
> > I am aware of the 1.6tb.
> > Only the four 1tb drives + DVD
> > But I want to just stop the Raid all together. Looking for the "how to"
> > turn off raid on boot.
>
> you need to know WHICH LSI logic raid controller this system has before
> you can get a straight answer. the Megaraid 924x/926x/927x/928x stuff
> is way different than the 920x/921x HBA stuff or the 97xx 3Ware based
> stuff. like, COMPLETELY different. megaraid in particular is a pain to
> configure but performs quite well.
>
> if its megaraid, they have an AWFUL 'web' style GUI in the BIOS, or a
> megacli command line which is nearly as awful. in either one, you'd
> need to DELETE the existing raid10 logical drive, then use the command
> or gui to 'convert all unassigned drives to JBOD', which is something
> like...
>
> megacli> cfgeachdskraid0a0
>
> (where a0 is controller 0)
>
> --
> john r pierce 37N 122W
> somewhere on the middle of the left coast
>
> Where I am, I took out 3 drives and it allowed Centos 6.4 to install.
I plugged in the other 3 drives and went to the raid setup in Centos.
I created a raid 5 with the three disks. It doesn't allow using the 1st os
boot disk in the raid.
Should I use a usb drive to host an install then once it's running install
the system again In the raided drives?
Norm
More information about the CentOS
mailing list