On 05/03/2013 06:05 PM, Rob Townley wrote: > Michael, very frustrating that so much noise for a very simple request. I > set up multi source routing in 5.3 or so and was astounded at all the > negativity on this list and that it could not be done. It will take > forever to read the noise in this thread alone. Some said you have to use > DHCP.... i could go on. > > Do not trust that ping -I will work how you would think. Must specify an > IP address, not eth0, not eth1. > ping -I 10.0.0.1 8.8.8.8 Yup. Sans the obfuscated IP address, that's exactly what I tested. > > This really is just a few lines per interface. > > Learn by changing the /etc/sysconfig/network-scripts/ifup-route shell > scripts to add logging. > echo out variables. I tried adding "set -x" to them. :) > > There is no need to get iptables involved at all unless doing something > very special. > > i did not want to setup quagga or some form of dynamic routing deamon > because of security concerns. i wanted static IP addresses communicating > to the ISP on static routes. It is pretty simple. Maybe i can hook up my > laptop to 3G and WiFi and Cat6 and make sure i get it working. Please > remember to use IP addresses, not names for ping testing. Scrutinize ping > results. > > ping -I 10.0.0.1 8.8.8.8 Yeah, I don't see a use for quagga at this time. [snip] -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 555 bytes Desc: OpenPGP digital signature URL: <http://lists.centos.org/pipermail/centos/attachments/20130503/3884042a/attachment-0004.sig>