[CentOS] CentOS 6 kernel > 2.6.32-279 won't boot on ABIT AB9
Tony Schreiner
anthony.schreiner at bc.edu
Thu Oct 24 20:33:54 UTC 2013
On Oct 24, 2013, at 3:55 PM, Akemi Yagi wrote:
On Thu, Oct 24, 2013 at 12:47 PM, Tony Schreiner
<anthony.schreiner at bc.edu<mailto:anthony.schreiner at bc.edu>> wrote:
I had used the the 6.3 net installer disk (and the 6.4 repo) which I noticed had kernel 2.6.32-279, so I retrieved that kernel from the vault and it works.
The 279 and earlier kernels don't display any ipmi messages during boot (in dmesg)
The system is not ipmi capable I don't believe, should I be looking there?
Try adding the following kernel parameters and see if the 6.4 kernel boots:
ipmi_si.tryacpi=0 ipmi_si.trydmi=0 ipmi_si.trydefaults=0
Akemi
______________________________________________
Akemi
Awesome, that did the trick.
I do not see those parameters in https://www.kernel.org/doc/Documentation/kernel-parameters.txt
There is an error in the boot to 2.6.32.-358.23.2
irq 19: nobody cared (try booting with the "irqpoll" option)
I've added the irqpoll parameter and the message goes away.Is there any downside to using it?
Tony
More information about the CentOS
mailing list