[CentOS] c6.4: D-Link USB network device (2001:1a02) not work.

Hi, I have plug in this USB network device:

> Bus 001 Device 002: ID 2001:1a02 D-Link Corp.

> T:  Bus=01 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#=  2 Spd=480  MxCh= 0
> D:  Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=00 MxPS=64 #Cfgs=  1
> P:  Vendor=2001 ProdID=1a02 Rev= 0.01
> S:  Manufacturer=D-Link          
> S:  Product=DUB-E100
> S:  SerialNumber=E5ECEB
> C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=200mA
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=00 Driver=(none)
> E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=128ms
> E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

This is the log information:

> Oct 24 10:10:56 s-virt kernel: usb 1-5: new high speed USB device number 2 using ehci_hcd
> Oct 24 10:10:57 s-virt kernel: usb 1-5: New USB device found, idVendor=2001, idProduct=1a02
> Oct 24 10:10:57 s-virt kernel: usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> Oct 24 10:10:57 s-virt kernel: usb 1-5: Product: DUB-E100
> Oct 24 10:10:57 s-virt kernel: usb 1-5: Manufacturer: D-Link          
> Oct 24 10:10:57 s-virt kernel: usb 1-5: SerialNumber: E5ECEB
> Oct 24 10:10:57 s-virt kernel: usb 1-5: configuration #1 chosen from 1 choice

But, if I run 'ip a' I do not see other new network device (ethX).

It's possible resolve this issue and use this USB network device?

Many thanks

-- 
Dario Lesca - sip:dario at solinos.it
(Inviato dal mio Linux Fedora19+Gnome3.8)