Try using the reboot=pci grub parameter. On Fri, Oct 11, 2013 at 11:40 AM, Terre Porter <tporter at webpage-builders.com > wrote: > Hello, > > > > I'm looking for help figuring out why I am having problems with shutting > down a machine. > > > > I have tested the machine using Fedora 19 and Ubuntu 12 Live CD's and both > power down without issues. > > > > I added acpi.debug_level=1 to the grub boot as it was suggested to see more > info about ACPI in the logs > > > > I found the following ACPI Errors in the /var/log/messages > > > > Oct 11 11:51:36 plum kernel: ACPI Error (psargs-0359): [ECEN] Namespace > lookup failure, AE_NOT_FOUND > > Oct 11 11:51:36 plum kernel: ACPI Error (psparse-0537): Method > parse/execution failed [\] (Node ffffffff81fdbeb0), AE_NOT_FOUND > > > > Oct 11 11:51:36 plum kernel: ACPI: resource piix4_smbus [io 0x0b00-0x0b07] > conflicts with ACPI region SOR1 [io 0xb00-0xb0f] > > Oct 11 11:51:36 plum kernel: ACPI: If an ACPI driver is available for this > device, you should use it instead of the native driver > > > > I used the Centos 6.4 Live CD last night with no hard drive in the system. > > > > I photo'd the shutdown, here is the type up: > > > > Sending all processes the TERM signal... > > Sendng all processes the KILL signal... > > Saving random seed: > > Syncing hardware clock to system time > > Turning off quotas: > > umount2: Device or resource busy > > umount: /dev/.initramfs/live: device is busy. > > (In some cases useful info about processes that use > > the device is found by lsof(8) or fuser(11)) > > init: Re-executing /sbin/init > > Halting System... > > r8169 0000:02:00.0: PME# enabled > > ACPI: Preparing to enter system sleep state S5 > > ACPI Error (psargs-0359): [PPTS] Namespace lookup failure, AE_NOT_FOUND > > ACPI Error (psparse-0537): Method parse/execution failed > [\_SB_.PCI0.SBRG.EPTS] (Node fff88019dbc8c68), AE_NOT_FOUND > > ACPI Error (psparse-0537): Method parse/execution failed [\PTS_] (Node > ffff88019d043560), AE_NOT_FOUND > > ACPI Error (psparse-0537): Method parse/execution failed [\_PTS] (Node > ffff88019dbcf9e8), AE_NOT_FOUND > > Disabling non-boot CPUS... > > SMP alternatives: switching to UP code > > Power Down. > > acpi_power_off called > > > > The system doesn't power off, it just sits there. I have to hold the power > button in for it to shut down. > > > > The same still occurs with a completed a fresh minimum install of Centos > 6.4, installed the EPEL repo and did yum update. > > > > I'm running the latest bios for the motherboard, and even tried going back > one version. > > > > MB: 785GM-E51 (MS-7596 1.2) > > CPU: AMD Phenom II x4 945 3ghz > > 1TB HD, 6 Gig Mem > > > > Any ideas? > > > > (Besides using a baseball bat - I am considering it) > > > > Here is some hardware info from the getinfo.sh script listed the forums. > > > > == BEGIN uname -rmi == > > 2.6.32-358.18.1.el6.x86_64 x86_64 x86_64 > > == END uname -rmi == > > > > == BEGIN rpm -qa \*-release\* == > > centos-release-6-4.el6.centos.10.x86_64 > > epel-release-6-8.noarch > > == END rpm -qa \*-release\* == > > > > == BEGIN cat /etc/redhat-release == > > CentOS release 6.4 (Final) > > == END cat /etc/redhat-release == > > > > == BEGIN getenforce == > > Enforcing > > == END getenforce == > > > > == BEGIN rpm -qa kernel\* | sort == > > kernel-2.6.32-358.18.1.el6.x86_64 > > kernel-2.6.32-358.el6.x86_64 > > kernel-firmware-2.6.32-358.18.1.el6.noarch > > == END rpm -qa kernel\* | sort == > > > > == BEGIN lspci -nn == > > 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS880 Host Bridge > [1022:9601] > > 00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to > PCI bridge (int gfx) [1022:9602] > > 00:05.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to > PCI bridge (PCIE port 1) [1022:9605] > > 00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee ATI > SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] > > 00:12.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI > SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] > > 00:12.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0 > USB OHCI1 Controller [1002:4398] > > 00:12.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI > SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] > > 00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI > SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] > > 00:13.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0 > USB OHCI1 Controller [1002:4398] > > 00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI > SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] > > 00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus > Controller [1002:4385] (rev 3c) > > 00:14.1 IDE interface [0101]: Advanced Micro Devices [AMD] nee ATI > SB7x0/SB8x0/SB9x0 IDE Controller [1002:439c] > > 00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI SBx00 > Azalia (Intel HDA) [1002:4383] > > 00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI > SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] > > 00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SBx00 PCI > to > PCI Bridge [1002:4384] > > 00:14.5 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI > SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] > > 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h > Processor HyperTransport Configuration [1022:1200] > > 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h > Processor Address Map [1022:1201] > > 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h > Processor DRAM Controller [1022:1202] > > 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h > Processor Miscellaneous Control [1022:1203] > > 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h > Processor Link Control [1022:1204] > > 01:05.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee > ATI RS880 [Radeon HD 4200] [1002:9710] > > 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. > RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03) > > == END lspci -nn == > > > > > > > > _______________________________________________ > CentOS mailing list > CentOS at centos.org > http://lists.centos.org/mailman/listinfo/centos >