On 7.8.2014 12:10, Maxim Shpakov wrote: > Hi! > > I think that your problem is here > > volgroup v pv.00 --noformat This gives another error ... Members may not be specified for preexisting volgroup ... This is not documented in the Installation Guide, but at http://fedoraproject.org/wiki/Anaconda it is stated ... --noformat Use an existing volume group. Do not specify partitions when using this option. ... Also note that this line works for the one disk install! Thanks anyways, Markus > > 2014-08-07 13:06 GMT+03:00 Markus Falb <markus.falb at fasel.at>: >> Hi, >> I am struggling with kickstart. >> What I want to achieve is a reinstall, but some data partitions should >> survive the install, i.e. they should not be formatted. >> With a single disk this works, here is the relevant part from the >> kickstart file (I shortened the name of the volume group) >> >> ... >> zerombr >> clearpart --none --initlabel >> part /boot --fstype="xfs" --label=boot --onpart=vda1 >> part pv.00 --fstype="lvmpv" --onpart=vda2 --noformat >> volgroup v --noformat >> logvol / --fstype=xfs --name=wurzel --vgname=v --useexisting >> logvol /home --fstype=ext4 --name=home --vgname=v --noformat >> ... >> >> you see, / will be reformatted, /boot will be reformatted, but /home >> will not. >> >> Now a machine with md raid 1. I tried the following. >> >> ... >> #zerombr >> #clearpart --none --initlabel >> >> part raid.01 --onpart vda1 --noformat >> part raid.02 --onpart vdb1 --noformat >> raid /boot --fstype xfs --label boot --level 1 --device md0 --noformat >> >> part raid.11 --onpart vda2 --noformat >> part raid.12 --onpart vdb2 --noformat >> raid pv.00 --level 1 --device md1 --noformat >> >> volgroup v --noformat >> logvol / --fstype=xfs --name=wurzel --vgname=v --useexisting >> logvol /home --fstype=ext4 --name=home --vgname=v --noformat >> ... >> >> But I get >> >> ... >> 02:54:21,069 ERR anaconda: storage configuration failed: The following >> problem occurred on line 6 of the kickstart file: >> >> No preexisting RAID device with the name "0" was found. >> ... >> >> What is wrong? I really want preserve data and only wipe system.