On 8/21/2014 12:43 PM, Matt wrote: > I have CentOS 6.x installed on a "HP ProLiant DL380 G5" server. It > has eight 750GB drives in a hardware RAID6 array. Its acting as a > host for a number of OpenVZ containers. > > Seems like every time I reboot this server which is not very often it > sits for hours running a disk check or something on boot. The server > is located 200+ miles away so its not very convenient to look at. Is > there anyway to tell if it plans to run this or tell it not too? > > Right now its reporting one of the drives in array is bad and last > time it did this a reboot resolved it. assuming thats a hp smartarray raid controller, use hpacucli to diagnose the raid problem. degraded raid6 is /really/ slow. -- john r pierce 37N 122W somewhere on the middle of the left coast