On Sun, Aug 31, 2014 at 2:05 PM, Reindl Harald <h.reindl at thelounge.net> wrote: > ook what adapter type you have configured for your virtual machine > maybe the GUI don't show it - it's even on vSphere a pain where you > need to remove the NIC and add it again by take care of the type > > * in doubt shut down the guest > * close VMware > * open the .vxm file > > ethernet0.virtualDev = "vmxnet3" > > depens if that "ethernet0.virtualDev" exists > if yes -> change it to vmxnet3 > if not add it somewhere around the other ethernet settings > This is what I have in .vxm file: ethernet0.present = "TRUE" ethernet0.virtualDev = "e1000" ethernet0.wakeOnPcktRcv = "FALSE" ethernet0.addressType = "static" ethernet0.address = "00:50:56:2E:E2:45" ethernet0.linkStatePropagation.enable = "TRUE" ethernet1.present = "TRUE" ethernet1.vnet = "VMnet1" ethernet1.connectionType = "custom" ethernet1.wakeOnPcktRcv = "FALSE" ethernet1.addressType = "static" ethernet1.address = "00:50:56:3F:86:30" And this is how I configured the network interface at Vmware http://imgur.com/GSX9N6c the weird part here is the same network configuration works fine in a CentOS 6.5 VM