[CentOS] CentOS7 Minimal installation on Vmware missing network interface

Hi there, I'm playing with CentOS 7 (don't know if it's recommended at all
have this one as a development server as maybe is not stable enough yet)
and I installed it on a Vmware VM with two network interfaces: one as a
bridged connected directly to the physical network and replicating the
network state and the second one as a host only interface (the one I use to
manage the VM) so after I got the CentOS installed I can see the first
interface but not the second one and I don't know how to enable it. If I
run the command ifconfig -a this is what I see:

eno16777728: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.1.112  netmask 255.255.255.0  broadcast 192.168.1.255
        inet6 fe80::250:56ff:fe2e:e245  prefixlen 64  scopeid 0x20<link>
        ether 00:50:56:2e:e2:45  txqueuelen 1000  (Ethernet)
        RX packets 126  bytes 17122 (16.7 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 83  bytes 12627 (12.3 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 0  (Local Loopback)
        RX packets 8  bytes 552 (552.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 8  bytes 552 (552.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

What I need to do in order to enable the other interface? Also how I change
the name eno16777728 to eth0-internet without get down my server?

Thanks in advace