On Thu, Aug 21, 2014 at 3:43 PM, Matt <matt.mailinglists at gmail.com> wrote: > I have CentOS 6.x installed on a "HP ProLiant DL380 G5" server. It > has eight 750GB drives in a hardware RAID6 array. Its acting as a > host for a number of OpenVZ containers. > > Seems like every time I reboot this server which is not very often it > sits for hours running a disk check or something on boot. The server > is located 200+ miles away so its not very convenient to look at. Is > there anyway to tell if it plans to run this or tell it not too? > > Right now its reporting one of the drives in array is bad and last > time it did this a reboot resolved it. > run: tune2fs -l /dev/mapper/<whatever_the_disk_is_called> check: Maximum mount count Next check after if those are NOT -1 and 0 respectively change settings by running: tune2fs -i 0 -c 0 /dev/mapper/<whatever_the_disk_is_called>