[CentOS] NIC Throwing errors I dont understand

2014/1/22 Jason T. Slack-Moehrle <slackmoehrle at gmail.com>

> I am having an issue where eth1 is throwing some messages and stops
> responding. Restarting networking doesn't work and also just bringing down
> eth1 with 'ifdown' doesn't fix it. I have never seen anything like these
> messages:
>
> eth1: no IPv6 routers present
> r8169 0000:03:00.0: eth1: rtl_counters_cond == 1 (loop: 1000, delay: 10).
> r8169 0000:03:00.0: eth1: rtl_chipcmd_cond == 1 (loop: 100, delay: 100).
> r8169 0000:03:00.0: eth1: rtl_phyar_cond == 1 (loop: 20, delay: 25).
> r8169 0000:03:00.0: eth1: rtl_phyar_cond == 1 (loop: 20, delay: 25).
> r8169 0000:03:00.0: eth1: rtl_phyar_cond == 1 (loop: 20, delay: 25).
> r8169 0000:03:00.0: eth1: rtl_phyar_cond == 1 (loop: 20, delay: 25).
> r8169 0000:03:00.0: eth1: rtl_phyar_cond == 1 (loop: 20, delay: 25).
> r8169 0000:03:00.0: eth1: rtl_phyar_cond == 1 (loop: 20, delay: 25).
> r8169 0000:03:00.0: eth1: rtl_phy_reset_cond == 1 (loop: 100, delay: 1).
> r8169 0000:03:00.0: eth1: rtl_phyar_cond == 1 (loop: 20, delay: 25).
> r8169 0000:03:00.0: eth1: rtl_phyar_cond == 1 (loop: 20, delay: 25).
> r8169 0000:03:00.0: eth1: rtl_phyar_cond == 1 (loop: 20, delay: 25).
> r8169 0000:03:00.0: eth1: rtl_phyar_cond == 1 (loop: 20, delay: 25).
> r8169 0000:03:00.0: eth1: rtl_phyar_cond == 1 (loop: 20, delay: 25).
> r8169 0000:03:00.0: eth1: rtl_phyar_cond == 1 (loop: 20, delay: 25).
> r8169 0000:03:00.0: eth1: rtl_phyar_cond == 1 (loop: 20, delay: 25).
> r8169 0000:03:00.0: eth1: link up
>

Sound like broken network card?

--
Eero