Preparatory to removing the PSU, I've been disconnecting it. Those Molex things are tough. So far, the hardest one I've removed is the 20-pin connector from the MB. It took me days. The 4-pin connector on the MB is proving to be harder. The receptacle seems to be more firmly attached to the plug than to th MB. I've tried getting a small screwdriver between the pieces and twisting, but the plastic gives before anything else. Just getting the screwdriver into such cramped quarters was difficult. I'm considering cutting the wires and splicing on another receptacle. I'd like a better idea. Any suggestions? -- Michael hennebry at web.cs.ndsu.NoDak.edu "SCSI is NOT magic. There are *fundamental technical reasons* why it is necessary to sacrifice a young goat to your SCSI chain now and then." -- John Woods