On Mon, Nov 17, 2014 at 11:06 AM, david <david at daku.org> wrote: > > > Thanks, Les, for that detail. I knew that x2go had a known bug, but didn't > know the name of the missing package. I explicitly installed it, but I > still get failure asking for the MATE desktop. To summarize, my client > shows the X2go screen, then it goes away. The version that is working for me is x2goserver-4.0.1.18-3.el7.x86_64. If that is not what you have, try: yum--enablerepo=epel-testing update x2goserver You might also have to do something to clean up the old sessions that the broken version had started - I can't remember what else I might have done. Also, if you can, make sure that MATE is working at the console, and for the first attempts turn off the drive mapping and sound to have fewer things that can break. > In response to others that suggested VNC, I used to use it, but was > disappointed with the speed when used remotely. On an internal LAN connect, > it worked fine, but otherwise it became painful to use. NX became my next > choice for Centos 6, but the x2go package became my favorite because of the > ease of installation -- (nx needed lots of other things at setup, and > appears unavailable for C7). > So far I am still mostly using NX/freenx on a C6 system as my main desktop with occasional 'ssh -Y ...' connections from there to C7 for GUI programs. I think x2go will be a usable replacement, but the windows client has some conflict with 'synergy' which I also use to share the keyboard/mouse with an adjacent laptop so I haven't switched yet. -- Les Mikesell lesmikesell at gmail.com