Op 22-10-14 om 23:15 schreef James B. Byrne: > As you can probably guess by now I am working my way down through my > outstanding issue list trying to get as many deferred items closed out as I > can before the next security storm hits. > > We have a Win7pro KVM guest that has been giving us networking issues since it > was created. The last problem was that it was picking up its network address > from the virtio DHCP service, with predicable results. This turned out to be > an issue with how the virtual nic was configured (it was using NAT instead of > the br0 bridge. > > We have adjusted the settings on the guest so the the nic is configured as a > shared device / br0 / Device Model=virtio. Now after it boots the thing says > that it does not have a driver for Ethernet adaptor at all. Is there a > different setting for the model that I should be using? > > I have to point out that this thing was originally installed from cd-rom and > then updated from the internet. So at some point it must have had a working > network connection. Any ideas as to how to get it to find the network > interface again? > James, on the client, which driver do you use? Mine is 'Red Hat VirtIO Ethernet Adapter' 61.65.104.7400 20/11/2013. I got it from virtio-win-0.1-74.iso Patrick