Anything enlightening showing up in /var/log/Xorg.0.log? Maybe something explaining why your conf is being ignored? Kahlil (Kal) Hodgson GPG: C9A02289 Head of Technology (m) +61 (0) 4 2573 0382 DealMax Pty Ltd (w) +61 (0) 3 9008 5281 Suite 1415 401 Docklands Drive Docklands VIC 3008 Australia "All parts should go together without forcing. You must remember that the parts you are reassembling were disassembled by you. Therefore, if you can't get them together again, there must be a reason. By all means, do not use a hammer." -- IBM maintenance manual, 1925 On Tue, Sep 23, 2014 at 7:37 AM, <m.roth at 5-cent.us> wrote: > m.roth at 5-cent.us wrote: >> I have one user. We've pretty much all got two monitors, but he insists on >> rotating both of them vertically - that is, they're taller than they are >> wide, and he's got a Radeon card. I always have X grief on his system when >> I update it.... >> >> I just did a full update. X comes up in both screens... but the left one >> is *not* rotated, while the right one is. And they're mirrored. I've >> logged in as root, looked at all the configuration I know of, and nothing >> tells it to mirror, or one rotate and the other not. But when I use the >> menu, and go to system->preferences-display, it shows mirror screens >> *always* checked. I uncheck that, and hit apply, and nothing happens. I >> move the one off from over the other, and rotate the other, and still, >> nothing at all happens, and I don't see anything written, anywhere. >> >> Suggestions? >> > A couple other things: the /etc/X11/xorg.conf that I fought successfully > last year is still in place, but it acts as though it's ignoring it. > > mark > > _______________________________________________ > CentOS mailing list > CentOS at centos.org > http://lists.centos.org/mailman/listinfo/centos