I am setting up a Centos 6.5 box to host some Openvz containers. I
have a 120gb SSD I am going to use for boot, / and swap. Should allow
for fast boots. Have a 4TB drive I am going to mount as /backup and
use to move container backups too etc. The remaining four 3TB drives
I am putting in a software RAID 10 array and mount as /vz and all the
containers will go there. It will have by far the most activity.
Does this layout look ok?
RAID Devices
md0 (/dev/md0) 5722917 /vz ext4
Hard Drives
sda (/dev/sda)
sda1 (/dev/sda1)
sda1 500 /boot ext4
sda2 64000 swap
sda3 49972 / ext4
sdb (/dev/sdb)
sdb1 3815446 /backup ext4
sdc (/dev/sdc)
sdc1 2861587 md0 software RAID
sdd (/dev/sdc)
sdd1 2861587 md0 software RAID
sde (/dev/sdc)
sdce 2861587 md0 software RAID
sdf (/dev/sdc)
sdf1 2861587 md0 software RAID