On 08/13/2015 11:06 PM, Digimer wrote: > On 13/08/15 09:15 PM, Johnny Hughes wrote: >> On 08/13/2015 02:30 PM, Thomas Eriksson wrote: >>> On 08/13/2015 11:34 AM, Digimer wrote: >>>> Booting from the USB requires that there is a syslinux directory to boot >>>> off of. In EL6, there is only isolinux, which is what booting from a DVD >>>> uses. You should be able to copy isolinux to syslinux, rename the files >>>> from s/iso/sys/ and then update syslinux.cfg to point to the USB drive >>>> to boot from. Here's an example from my setup: >>>> >>> >>> Perhaps something went wrong with the 6.7 DVD, I haven't tested yet. >>> It is definitely supposed to work by just using dd to a USB stick. >>> Both 6.5 and 6.6 DVDs works just fine and so does the 6.7-network- >>> install iso. I just installed a node 10 minutes ago using that one >>> booted from a USB stick. >> >> I just dd'ed the 6.7 DVD1 image to a usb key and booted fine with it on >> a machine with normal BIOS. >> >> I'll test it on a UEFI machine later, but it seems to work fine. >> >> One thing to make sure is that the key is unmounted before you start // >> I used this command: >> >> sudo dd if=./CentOS-6.7-x86_64-bin-DVD1.iso of=/dev/sdc bs=4M >> >> (Also make sure to copy to the device and not a partition .. ie, not >> /dev/sdc1 .. /dev/sdc) >> >> And make sure to use the command: >> >> sync >> >> after the dd .. and umount/eject the device if it remoted before >> removing the key from the machine where you are copying it. > > My apologies for the mis-information. > > Did this change in a recent release? (The addition of syslinux to the > ISO, that is) > I did not see a syslinux only isolinux .. it still boots and installs on my Dell M4500 laptop as is. -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 198 bytes Desc: OpenPGP digital signature URL: <http://lists.centos.org/pipermail/centos/attachments/20150814/8d501316/attachment-0004.sig>