[CentOS] Kickstart with multiple eth devices

Wed Feb 25 20:53:40 UTC 2015
Ashley M. Kirchner <ashley at pcraft.com>

Thanks for that Jason but it didn't solve the problem. The system is still
coming up with the interfaces shuffled. It seems to *always* want to use
the added ethernet card as eth0.

On Wed, Feb 25, 2015 at 1:37 PM, Jason Warr <jason at warr.net> wrote:

> Starting back in RHEL/Cent 5 I found that the only way to make sure your
> interface enumeration was consistent after install with what you had during
> install was to create a udev rules file using the mac addresses as the
> key.  It is easy to run a short script in postinstall to create it based on
> how anaconda has seen them.
>
> In order for this to work on Cent 6 you have to set biosdevname=0 on the
> kernel boot for the installed system.
>
> PXE boot options:
>
> label c6inst-sda
>     kernel /linux-boot/cent6-x64/vmlinuz
>     append initrd=/linux-boot/cent6-x64/initrd.img ksdevice=bootif
> ip=dhcp ks=http://xx.xx.xx.xx/install/linux/ks/basic-cent6-sda.cfg
>     ipappend 2
>
> In kickstart:
>
> BOOTOPTS="biosdevname=0"
>
> Also in kickstart I do not specify the config for ANY network interfaces.
> I let anaconda pull in only the config for the boot interface from PXE.  I
> manually configure everything else.  The only thing I do to non-boot
> interfaces is set the DHCP and ONBOOT to no.
>
>
>
> On Wed, 25 Feb 2015 14:21:18 -0600, Ashley M. Kirchner <ashley at pcraft.com>
> wrote:
>
>  Version 6.6 ...
>>
>> On Wed, Feb 25, 2015 at 1:17 PM, Jim Perrin <jperrin at centos.org> wrote:
>>
>>  <overly trimmed>
>>>
>>> On 02/25/2015 01:56 PM, Ashley M. Kirchner wrote:
>>> > Ok, so some of this now works, but I'm still having problems. With the
>>> > bootif option, the system now correctly configures and uses the same
>>> > interface to get its kickstart file. However, when the system is done
>>> and
>>> > boots up, the interfaces are still messed up. So this is what I have in
>>> the
>>> > kickstart file:
>>>
>>> What version of CentOS 6 is this?
>>>
>>> > In the PXE config file I have:
>>> >
>>> > IPAPPEND 2
>>> > APPEND ks=http://192.168.x.x/ks/portico.ks
>>> initrd=centos/x86_64/initrd.img
>>> > ramdisk_size=100000 ksdevice=bootif
>>>
>>> > As soon as I *remove* the additional ethernet card, the system will
>>> boot
>>> up
>>> > with the ports configured correctly (port 1 = eth0, port 2 = eth1). So
>>> why
>>> > is it that as soon as there is an additional one, all things go to
>>> hell?
>>> > Why must the boot process shuffle them? More importantly, how do I
>>> prevent
>>> > this so that the system comes up properly after a kickstart install?
>>> >
>>>
>>> The reason I ask the version, is this is exactly the sort of thing that
>>> biosdevname is designed to solve. With biosdevname, you get devices like
>>> 'em1, em2, p6p1', which aren't as friendly as 'eth0' but also keep names
>>> sane and avoid the hair-tearing issues you're experiencing currently.
>>> You don't appear to be adding anything via your append line that would
>>> disable biosdevname, so I must assume you're using a much older 6 base
>>> install.
>>>
>>>
> In my experience biosdevname creates just as many problems as it solves.
> Dell can keep it.
>
>
>
>>> --
>>> Jim Perrin
>>> The CentOS Project | http://www.centos.org
>>> twitter: @BitIntegrity | GPG Key: FA09AD77
>>> _______________________________________________
>>> CentOS mailing list
>>> CentOS at centos.org
>>> http://lists.centos.org/mailman/listinfo/centos
>>>
>>>
>>>  _______________________________________________
>> CentOS mailing list
>> CentOS at centos.org
>> http://lists.centos.org/mailman/listinfo/centos
>>
>
>