Am 04.01.2015 um 19:32 schrieb ken <gebser at mousecar.com>: > A system whose network routing table looks like this (abbreviated): > > Destination Gateway Genmask Flags Metric Ref Use Iface > 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 > 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 > > needs to look like this: > > Destination Gateway Genmask Flags Metric Ref Use Iface > 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 > 10.10.0.0 192.168.0.98 255.255.0.0 UG 0 0 0 eth0 > 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 > > The first table is nicely configured by the files under /etc/sysconfig/. > > The first table becomes the second when this command is run: > > route add -net 10.10.0.0/16 gw 192.168.0.98 eth0 > > The question is, which file(s) need to be configured under /etc/sysconfig/-- and with what-- in order to accomplish what the "route add ..." command does? which OS? for EL5, from /usr/share/doc/initscripts-8.45.45/sysconfig.txt /etc/sysconfig/network-scripts/route-<interface-name> Contains lines that specify additional routes that should be added when the associated interface is brought up. -- LF