Hello all, I have a machine running Centos 6.6 connected to a port on a Cisco Catalyst 3750 series switch. That port is part of VLAN 48. I have VLAN 48 on the CentOS machine too. The IP network on VLAN 48 is 192.168.48.0/255.255.255.0. The address on the CentOS side is 192.168.48.101, the address on the Linux end ought to be 192.168.48.100. When I only bring up eth0.48 VLAN device with the IP=192.168.48.100 I have no connectivity. If I bring it up along with eth0 with another VLAN 48 address assigned to it (for instance, 192.168.48.99) I do have connectivity. Also, strangely enough, sometimes to get things going I have to disconnect the Linux host from the switch - physically detach the wire and reconnect it again. Be that as it may when I just bring up the VLAN by itself I have thus far been unable to get anywhere. Has anybody seen a situation like this? Does anybody have an explaination for it? Thanks. Boris.