On Thu, 12 Mar 2015 12:43:27 -0500, Robert Moskowitz <rgm at htt-consult.com> wrote: > I know how to use 'ip' to set up a static route, e.g.: > > ip route add 192.168.128.0/17 via 40.53.24.3 dev eth0 > > But if you reboot or restart network, you loose this. Thus you have to > make it persistant. I found: > > http://www.cyberciti.biz/tips/configuring-static-routes-in-debian-or-red-hat-linux-systems.html > > where it says to add to ifcfg-eth0: > > 192.168.128.0/17 via 40.53.24.3 > Create the file /etc/sysconfig/network-scripts/route-eth0 Add the following for each static route, incrementing the numeric for each: ADDRESS0=192.168.128.0 NETMASK0=255.255.128.0 GATEWAY0=40.53.24.3 > But this did not work after the interface was restarted. So what is the > proper to set up persistant static routes? > > > _______________________________________________ > CentOS mailing list > CentOS at centos.org > http://lists.centos.org/mailman/listinfo/centos