Is it working on localhost with nrpe check? Did you checked out logs of nrped? Eero 1.5.2015 8.31 ip. "Tim Dunphy" <bluethundr at gmail.com> kirjoitti: > Hi Eric, > > > > NRPE: Error receiving data from daemon > > Seems as this is not a SSL Problem. Do you have a nagios user account? > Cat > > /etc/passwd > > > > > Yep! Both hosts have nagios user accounts. > > > Demonstrating from the client: > > [root at ops:~] #id nagios > uid=2002(nagios) gid=2002(nagios) groups=2002(nagios),2008(nagioscmd) > > > And this is from the monitoring server: > > [root at monitor1:~] #id nagios > uid=1001(nagios) gid=1001(nagios) groups=1001(nagios),1002(nagcmd) > > I do notice a slight difference in the user id and group id numbers. But I > don't think that could be causing any issue. Does anyone else disagree? > > I might want to standardize user accounts at some point howver. > > Thanks! > Tim > > > On Fri, May 1, 2015 at 1:03 PM, Eric Lehmann <e.lehmann88 at gmail.com> > wrote: > > > Hi > > > > NRPE: Error receiving data from daemon > > > > Seems as this is not a SSL Problem. Do you have a nagios user account? > Cat > > /etc/passwd > > Am 01.05.2015 18:45 schrieb "Tim Dunphy" <bluethundr at gmail.com>: > > > > > > > > > > Oh my mistake. I mean nrpe without parameters. It should say > something > > > > about SSL/TLS aktiv or so. > > > > You could test nrpe without SSL. Use nrpe -n - H host > > > > > > > > > > > > This is what I see about ssl if I just run nrpe on the client without > any > > > flags: > > > > > > [root at ops:~] #nrpe| head -8 > > > > > > NRPE - Nagios Remote Plugin Executor > > > Copyright (c) 1999-2008 Ethan Galstad (nagios at nagios.org) > > > Version: 2.15 > > > Last Modified: 09-06-2013 > > > License: GPL v2 with exemptions (-l for more info) > > > SSL/TLS Available: Anonymous DH Mode, OpenSSL 0.9.6 or higher required > > > TCP Wrappers Available > > > > > > And if I go back to the monitoring host and try to run nrpe with the -n > > > flag, this is what I get: > > > > > > [root at monitor1:~] #/usr/local/nagios/libexec/check_nrpe -n -H > > > ops.jokefire.com > > > *CHECK_NRPE: Error receiving data from daemon.* > > > > > > And still getting the SSL error without the -n flag: > > > > > > [root at monitor1:~] #/usr/local/nagios/libexec/check_nrpe -H > > > ops.jokefire.com > > > *CHECK_NRPE: Error - Could not complete SSL handshake.* > > > > > > Running nmap from the monitor host I can see that the nrpe port is > open: > > > > > > [root at monitor1:~] #nmap -p 5666 ops.jokefire.com > > > > > > Starting Nmap 6.40 ( http://nmap.org ) at 2015-05-01 12:38 EDT > > > Nmap scan report for ops.jokefire.com (54.225.218.125) > > > Host is up (0.011s latency). > > > rDNS record for 54.225.218.125: > > ec2-54-225-218-125.compute-1.amazonaws.com > > > PORT STATE SERVICE > > > *5666/tcp open nrpe* > > > > > > Nmap done: 1 IP address (1 host up) scanned in 0.14 seconds > > > > > > Yet if I try telnetting to it, it connects, then closes the connection > > > immediately: > > > > > > [root at monitor1:~] #telnet ops.jokefire.com 5666 > > > Trying 54.225.218.125... > > > *Connected to ops.jokefire.com <http://ops.jokefire.com>.* > > > Escape character is '^]'. > > > *Connection closed by foreign host.* > > > > > > Going back to the ops host that I want to monitor, I can verify that > the > > > port is listening: > > > > > > [root at ops:~] #lsof -i :5666 > > > COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME > > > xinetd 1434 root 5u IPv4 4063 TCP *:nrpe (LISTEN) > > > > > > > > > And I can verify that the nrpe conf is owned by the nagios user and > > group: > > > > > > [root at ops:~] #ls -l /usr/local/nagios/etc/nrpe.cfg > > > -rw-r--r-- 1 nagios nagios 7988 May 1 00:37 > > /usr/local/nagios/etc/nrpe.cfg > > > > > > I think that covers all your suggestions. Except for Eero's suggestion > to > > > try running nrpe without xinetd. I can try to get to that later, but I > > may > > > not have time for that suggestion today. But as I demonstrate above, > the > > > problem is not that nrpe isn't listening. > > > > > > This remains a really odd situation. Does anyone else have any clues? > > > > > > Thanks, > > > Tim > > > > > > > > > > > > On Fri, May 1, 2015 at 7:43 AM, Eric Lehmann <e.lehmann88 at gmail.com> > > > wrote: > > > > > > > Oh my mistake. I mean nrpe without parameters. It should say > something > > > > about SSL/TLS aktiv or so. > > > > You could test nrpe without SSL. Use nrpe -n - H host > > > > Am 01.05.2015 13:18 schrieb "Eero Volotinen" <eero.volotinen at iki.fi > >: > > > > > > > > > well. how about trying default setting and running nrped without > > > xinetd. > > > > > > > > > > -- > > > > > Eero > > > > > > > > > > 2015-05-01 14:14 GMT+03:00 Tim Dunphy <bluethundr at gmail.com>: > > > > > > > > > > > > This is strange... > > > > > > > Do you have SSL aktive on both systems? Run nrpr localy without > > > > > > parameters > > > > > > > (this should return some nrpe stats) and check ldd for libssl. > > > > > > > > > > > > > > > > > > I don't seem to have that command. > > > > > > > > > > > > > > > > > > [root at monitor1:~] #find / -name "*nrpr" 2> /dev/null > > > > > > [root at monitor1:~] # > > > > > > > > > > > > And that's on either system. > > > > > > > > > > > > And if I do an ldd on both, this is what I can tell: > > > > > > > > > > > > Server: > > > > > > > > > > > > [root at monitor1:~] #ldd /usr/local/nagios/libexec/check_nrpe > > > > > > linux-vdso.so.1 => (0x00007fffd895d000) > > > > > > * libssl.so.10 => /lib64/libssl.so.10 > (0x00007fc61722a000)* > > > > > > * libcrypto.so.10 => /lib64/libcrypto.so.10 > > > > (0x00007fc616e43000)* > > > > > > libnsl.so.1 => /lib64/libnsl.so.1 (0x00007fc616c29000) > > > > > > libc.so.6 => /lib64/libc.so.6 (0x00007fc616868000) > > > > > > libgssapi_krb5.so.2 => /lib64/libgssapi_krb5.so.2 > > > > > > (0x00007fc61661c000) > > > > > > libkrb5.so.3 => /lib64/libkrb5.so.3 (0x00007fc616338000) > > > > > > libcom_err.so.2 => /lib64/libcom_err.so.2 > > > (0x00007fc616134000) > > > > > > libk5crypto.so.3 => /lib64/libk5crypto.so.3 > > > > (0x00007fc615f02000) > > > > > > libdl.so.2 => /lib64/libdl.so.2 (0x00007fc615cfd000) > > > > > > libz.so.1 => /lib64/libz.so.1 (0x00007fc615ae7000) > > > > > > /lib64/ld-linux-x86-64.so.2 (0x00007fc6174a0000) > > > > > > libkrb5support.so.0 => /lib64/libkrb5support.so.0 > > > > > > (0x00007fc6158d8000) > > > > > > libkeyutils.so.1 => /lib64/libkeyutils.so.1 > > > > (0x00007fc6156d3000) > > > > > > libresolv.so.2 => /lib64/libresolv.so.2 > > (0x00007fc6154b9000) > > > > > > libpthread.so.0 => /lib64/libpthread.so.0 > > > (0x00007fc61529d000) > > > > > > libselinux.so.1 => /lib64/libselinux.so.1 > > > (0x00007fc615077000) > > > > > > libpcre.so.1 => /lib64/libpcre.so.1 (0x00007fc614e16000) > > > > > > liblzma.so.5 => /lib64/liblzma.so.5 (0x00007fc614bf1000) > > > > > > > > > > > > > > > > > > Client: > > > > > > > > > > > > [root at ops:~] #ldd /usr/local/nagios/libexec/check_nrpe > > > > > > * libssl.so.6 => /lib64/libssl.so.6 (0x00002aaaaaaba000)* > > > > > > * libcrypto.so.6 => /lib64/libcrypto.so.6 > > > (0x00002aaaaad08000)* > > > > > > libnsl.so.1 => /lib64/libnsl.so.1 (0x00002aaaab05a000) > > > > > > libc.so.6 => /lib64/libc.so.6 (0x00002aaaab273000) > > > > > > libgssapi_krb5.so.2 => /usr/lib64/libgssapi_krb5.so.2 > > > > > > (0x00002aaaab5cc000) > > > > > > libkrb5.so.3 => /usr/lib64/libkrb5.so.3 > > (0x00002aaaab7fa000) > > > > > > libcom_err.so.2 => /lib64/libcom_err.so.2 > > > (0x00002aaaaba90000) > > > > > > libk5crypto.so.3 => /usr/lib64/libk5crypto.so.3 > > > > > > (0x00002aaaabc92000) > > > > > > libdl.so.2 => /lib64/libdl.so.2 (0x00002aaaabeb7000) > > > > > > libz.so.1 => /lib64/libz.so.1 (0x00002aaaac0bc000) > > > > > > /lib64/ld-linux-x86-64.so.2 (0x0000555555554000) > > > > > > libkrb5support.so.0 => /usr/lib64/libkrb5support.so.0 > (0x0 > > > > > > 0002aaaac2d0000) > > > > > > libkeyutils.so.1 => /lib64/libkeyutils.so.1 > > > > (0x00002aaaac4d8000) > > > > > > libresolv.so.2 => /lib64/libresolv.so.2 > > (0x00002aaaac6db000) > > > > > > libselinux.so.1 => /lib64/libselinux.so.1 > > > (0x00002aaaac8f0000) > > > > > > libsepol.so.1 => /lib64/libsepol.so.1 > (0x00002aaaacb09000) > > > > > > > > > > > > > > > > > > So it looks like everything is OK from the SSL end of things. Any > > > other > > > > > > ideas or suggestions? > > > > > > > > > > > > Thanks > > > > > > Tim > > > > > > > > > > > > On Fri, May 1, 2015 at 5:46 AM, Eric Lehmann < > > e.lehmann88 at gmail.com> > > > > > > wrote: > > > > > > > > > > > > > This is strange... > > > > > > > Do you have SSL aktive on both systems? Run nrpr localy without > > > > > > parameters > > > > > > > (this should return some nrpe stats) and check ldd for libssl. > > > > > > > Am 01.05.2015 07:32 schrieb "Tim Dunphy" <bluethundr at gmail.com > >: > > > > > > > > > > > > > > > Hi Eric, > > > > > > > > > > > > > > > > Thanks for your reply. I do have nrpe running under xinetd > on > > > the > > > > > host > > > > > > > I'm > > > > > > > > trying to monitor. > > > > > > > > > > > > > > > > And running the nrpe checl locally: > > > > > > > > > > > > > > > > [root at ops:~] #/usr/local/nagios/libexec/check_nrpe -H > > localhost > > > > > > > > NRPE v2.15 > > > > > > > > > > > > > > > > [root at ops:~] #grep only_from /etc/xinetd.d/nrpe > > > > > > > > only_from = 127.0.0.1 216.120.248.126 > > > > > > > > > > > > > > > > And I do have port 5666 open on the security group for this > > host. > > > > > > > > > > > > > > > > And I made sure the local firewall was stopped, because I am > > > > blocking > > > > > > > ports > > > > > > > > with the security groups instead. > > > > > > > > > > > > > > > > [root at ops:~] #service iptables status > > > > > > > > Firewall is stopped. > > > > > > > > > > > > > > > > It's only when checking from the monitoring host that nrpe > > fails: > > > > > > > > > > > > > > > > [root at monitor1:~] #/usr/local/nagios/libexec/check_nrpe -H > > > > > > > > ops.jokefire.com > > > > > > > > CHECK_NRPE: Error - Could not complete SSL handshake. > > > > > > > > > > > > > > > > Really, really puzzling. This is driving me up a wall!! I > hopeI > > > can > > > > > > solve > > > > > > > > this soon.... > > > > > > > > > > > > > > > > Thanks for any and all help with this one!! > > > > > > > > Tim > > > > > > > > > > > > > > > > On Fri, May 1, 2015 at 1:02 AM, Eric Lehmann < > > > > e.lehmann88 at gmail.com> > > > > > > > > wrote: > > > > > > > > > > > > > > > > > Hi > > > > > > > > > Does the deamon run under xinetd? Then you have to > configure > > > the > > > > > > > > only_from > > > > > > > > > in */etc/**xinetd.d**/**nrpe* to. > > > > > > > > > > > > > > > > > > Regards > > > > > > > > > Eric > > > > > > > > > Am 01.05.2015 06:46 schrieb "Tim Dunphy" < > > bluethundr at gmail.com > > > >: > > > > > > > > > > > > > > > > > > > Hello, > > > > > > > > > > > > > > > > > > > > I am trying to monitor a host in the Amazon EC2 cloud. > > > > > > > > > > > > > > > > > > > > Yet when I try to check NRPE from the monitoring host I > am > > > > > getting > > > > > > an > > > > > > > > SSL > > > > > > > > > > handshake error: > > > > > > > > > > > > > > > > > > > > [root at monitor1:~] #/usr/local/nagios/libexec/check_nrpe > -H > > > > > > > > > > ops.jokefire.com > > > > > > > > > > CHECK_NRPE: Error - Could not complete SSL handshake. > > > > > > > > > > > > > > > > > > > > And if I telnet into the host on port 5666 to see if the > FW > > > > port > > > > > is > > > > > > > > open, > > > > > > > > > > the connection closes right away: > > > > > > > > > > > > > > > > > > > > [root at monitor1:~] #telnet ops.somewhere.com 5666 > > > > > > > > > > Trying 54.225.218.125... > > > > > > > > > > Connected to ops.somewhere.com. > > > > > > > > > > Escape character is '^]'. > > > > > > > > > > Connection closed by foreign host. > > > > > > > > > > > > > > > > > > > > You can see there it connects, but then it closes > > immediately > > > > > after > > > > > > > the > > > > > > > > > > connection. > > > > > > > > > > > > > > > > > > > > I have NRPE running on the host I want to monitor: > > > > > > > > > > > > > > > > > > > > [root at ops:~] #lsof -i :5666 > > > > > > > > > > COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME > > > > > > > > > > xinetd 1434 root 5u IPv4 4063 TCP *:nrpe > > > (LISTEN) > > > > > > > > > > > > > > > > > > > > And I have the IP of my nagios server listed in the > xinetd > > > conf > > > > > > file: > > > > > > > > > > > > > > > > > > > > [root at ops:~] #cat /etc/xinetd.d/nrpe > > > > > > > > > > # default: on > > > > > > > > > > # description: NRPE (Nagios Remote Plugin Executor) > > > > > > > > > > service nrpe > > > > > > > > > > { > > > > > > > > > > flags = REUSE > > > > > > > > > > socket_type = stream > > > > > > > > > > port = 5666 > > > > > > > > > > wait = no > > > > > > > > > > user = nagios > > > > > > > > > > group = nagios > > > > > > > > > > server = /usr/local/nagios/bin/nrpe > > > > > > > > > > server_args = -c > /usr/local/nagios/etc/nrpe.cfg > > > > > --inetd > > > > > > > > > > log_on_failure += USERID > > > > > > > > > > disable = no > > > > > > > > > > only_from = 127.0.0.1 xx.xx.xx.xx # <- > > > > > representing > > > > > > > my > > > > > > > > > real > > > > > > > > > > nagios server IP > > > > > > > > > > } > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > And I have my default security group for that host open > on > > > port > > > > > > 5666 > > > > > > > to > > > > > > > > > the > > > > > > > > > > world for this experiment. I plan on locking that down > > again > > > > to > > > > > > the > > > > > > > > > single > > > > > > > > > > IP of my monitoring host once I get this resolved. > > > > > > > > > > > > > > > > > > > > Does anyone have any suggestions on how I can get that > > > problem > > > > > > > solved? > > > > > > > > > > > > > > > > > > > > Thanks, > > > > > > > > > > Tim > > > > > > > > > > > > > > > > > > > > -- > > > > > > > > > > GPG me!! > > > > > > > > > > > > > > > > > > > > gpg --keyserver pool.sks-keyservers.net --recv-keys > > F186197B > > > > > > > > > > _______________________________________________ > > > > > > > > > > CentOS mailing list > > > > > > > > > > CentOS at centos.org > > > > > > > > > > http://lists.centos.org/mailman/listinfo/centos > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > > > > > CentOS mailing list > > > > > > > > > CentOS at centos.org > > > > > > > > > http://lists.centos.org/mailman/listinfo/centos > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > > GPG me!! > > > > > > > > > > > > > > > > gpg --keyserver pool.sks-keyservers.net --recv-keys F186197B > > > > > > > > _______________________________________________ > > > > > > > > CentOS mailing list > > > > > > > > CentOS at centos.org > > > > > > > > http://lists.centos.org/mailman/listinfo/centos > > > > > > > > > > > > > > > _______________________________________________ > > > > > > > CentOS mailing list > > > > > > > CentOS at centos.org > > > > > > > http://lists.centos.org/mailman/listinfo/centos > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > GPG me!! > > > > > > > > > > > > gpg --keyserver pool.sks-keyservers.net --recv-keys F186197B > > > > > > _______________________________________________ > > > > > > CentOS mailing list > > > > > > CentOS at centos.org > > > > > > http://lists.centos.org/mailman/listinfo/centos > > > > > > > > > > > _______________________________________________ > > > > > CentOS mailing list > > > > > CentOS at centos.org > > > > > http://lists.centos.org/mailman/listinfo/centos > > > > > > > > > _______________________________________________ > > > > CentOS mailing list > > > > CentOS at centos.org > > > > http://lists.centos.org/mailman/listinfo/centos > > > > > > > > > > > > > > > > -- > > > GPG me!! > > > > > > gpg --keyserver pool.sks-keyservers.net --recv-keys F186197B > > > _______________________________________________ > > > CentOS mailing list > > > CentOS at centos.org > > > http://lists.centos.org/mailman/listinfo/centos > > > > > _______________________________________________ > > CentOS mailing list > > CentOS at centos.org > > http://lists.centos.org/mailman/listinfo/centos > > > > > > -- > GPG me!! > > gpg --keyserver pool.sks-keyservers.net --recv-keys F186197B > _______________________________________________ > CentOS mailing list > CentOS at centos.org > http://lists.centos.org/mailman/listinfo/centos >