I've got a DN2820FYKH and graphics were a problem until I install kernel-ml from ElRepo. http://elrepo.org/tiki/kernel-ml HTH Lucian -- Sent from the Delta quadrant using Borg technology! Nux! www.nux.ro ----- Original Message ----- > From: "Jerry Geis" <geisj at pagestation.com> > To: "CentOS mailing list" <centos at centos.org> > Sent: Wednesday, 6 May, 2015 17:12:23 > Subject: [CentOS] Intel NUC haswell-ULT > I have one of those new little NUC's and installed Centos 7.1 on it. > > lspci shows > 00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 09) > 00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated > Graphics Controller (rev 09) > 00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller > (rev 09) > 00:14.0 USB controller: Intel Corporation 8 Series USB xHCI HC (rev 04) > 00:16.0 Communication controller: Intel Corporation 8 Series HECI #0 (rev > 04) > 00:19.0 Ethernet controller: Intel Corporation Ethernet Connection I218-V > (rev 04) > 00:1b.0 Audio device: Intel Corporation 8 Series HD Audio Controller (rev > 04) > 00:1d.0 USB controller: Intel Corporation 8 Series USB EHCI #1 (rev 04) > 00:1f.0 ISA bridge: Intel Corporation 8 Series LPC Controller (rev 04) > 00:1f.2 SATA controller: Intel Corporation 8 Series SATA Controller 1 [AHCI > mode] (rev 04) > 00:1f.3 SMBus: Intel Corporation 8 Series SMBus Controller (rev 04) > > Everything is working - except a reboot. Its gets stuck. > I also tried just doing "init 3" and that locked it up also. > So may be a graphics thing. > > Anyone know of a resolution? > > Jerry > _______________________________________________ > CentOS mailing list > CentOS at centos.org > http://lists.centos.org/mailman/listinfo/centos