Hi On Tue, Nov 3, 2015 at 4:56 PM, Reynier Perez Mira <reynierpm at gmail.com> wrote: > I have two servers identified as `server-1 - 192.168.3.128` and `server-2 - > 192.168.3.130`. I am setting up `capifony` for automatic deployment from > server-1 to server-2 and this is what I have done so far: > > 1. In both servers I have created a user `deploy` without password since > that's the user I will use for deployment. > 2. In server-1 I setup a SSH keys by running the command: `ssh-keygen` and > I leave without pass-phrase and default directories. > 3. I have copied the content of `/home/deploy/.ssh/id_rsa.pub` at server-1 > into server-2 at `/home/deploy/.ssh/authorized_keys`. > 4. From server-1 I try to reach server-2 by running `ssh > deploy at 192.168.3.130` and it's asking for a password (below is the output) > > /var/log/secure should give you an indication of why the key is not being accepted. But you may have to turn the log level up. But initial thoughts are that it is likely to be a permissions problem the ~deploy/.ssh directory needs to be 700 If you are using SE Linux then you may want to try doing restorecon -Rv ~deploy/.ssh > $ ssh deploy at 192.168.3.130 > The authenticity of host '192.168.3.130 (192.168.3.130)' can't be > established. > RSA key fingerprint is > 3c:81:da:7a:78:0f:b0:2f:44:3b:62:fb:c9:6f:33:86. > Are you sure you want to continue connecting (yes/no)? yes > Warning: Permanently added '192.168.3.130' (RSA) to the list of > known hosts. > deploy at 192.168.3.130's password: > > This is the `-v` output of the command above: > > OpenSSH_5.3p1, OpenSSL 1.0.1e-fips 11 Feb 2013 > debug1: Reading configuration data /etc/ssh/ssh_config > debug1: Applying options for * > debug1: Connecting to 192.168.3.130 [192.168.3.130] port 22. > debug1: Connection established. > debug1: identity file /home/deploy/.ssh/identity type -1 > debug1: identity file /home/deploy/.ssh/identity-cert type -1 > debug1: identity file /home/deploy/.ssh/id_rsa type 1 > debug1: identity file /home/deploy/.ssh/id_rsa-cert type -1 > debug1: identity file /home/deploy/.ssh/id_dsa type -1 > debug1: identity file /home/deploy/.ssh/id_dsa-cert type -1 > debug1: identity file /home/deploy/.ssh/id_ecdsa type -1 > debug1: identity file /home/deploy/.ssh/id_ecdsa-cert type -1 > debug1: Remote protocol version 2.0, remote software version > OpenSSH_5.3 > debug1: match: OpenSSH_5.3 pat OpenSSH* > debug1: Enabling compatibility mode for protocol 2.0 > debug1: Local version string SSH-2.0-OpenSSH_5.3 > debug1: SSH2_MSG_KEXINIT sent > debug1: SSH2_MSG_KEXINIT received > debug1: kex: server->client aes128-ctr hmac-md5 none > debug1: kex: client->server aes128-ctr hmac-md5 none > debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent > debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP > debug1: SSH2_MSG_KEX_DH_GEX_INIT sent > debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY > debug1: Host '192.168.3.130' is known and matches the RSA host key. > debug1: Found key in /home/deploy/.ssh/known_hosts:1 > debug1: ssh_rsa_verify: signature correct > debug1: SSH2_MSG_NEWKEYS sent > debug1: expecting SSH2_MSG_NEWKEYS > debug1: SSH2_MSG_NEWKEYS received > debug1: SSH2_MSG_SERVICE_REQUEST sent > debug1: SSH2_MSG_SERVICE_ACCEPT received > debug1: Authentications that can continue: > publickey,gssapi-keyex,gssapi-with-mic,password > debug1: Next authentication method: gssapi-keyex > debug1: No valid Key exchange context > debug1: Next authentication method: gssapi-with-mic > debug1: Unspecified GSS failure. Minor code may provide more > information > Cannot determine realm for numeric host address > > debug1: Unspecified GSS failure. Minor code may provide more > information > Cannot determine realm for numeric host address > > debug1: Unspecified GSS failure. Minor code may provide more > information > > > debug1: Unspecified GSS failure. Minor code may provide more > information > Cannot determine realm for numeric host address > > debug1: Next authentication method: publickey > debug1: Trying private key: /home/deploy/.ssh/identity > debug1: Offering public key: /home/deploy/.ssh/id_rsa > debug1: Authentications that can continue: > publickey,gssapi-keyex,gssapi-with-mic,password > debug1: Trying private key: /home/deploy/.ssh/id_dsa > debug1: Trying private key: /home/deploy/.ssh/id_ecdsa > debug1: Next authentication method: password > deploy at 192.168.3.130's password: > > Why? What I am doing wrong? > > _______________________________________________ > CentOS mailing list > CentOS at centos.org > https://lists.centos.org/mailman/listinfo/centos >