On Wed, Sep 2, 2015 at 1:59 PM, Leonard den Ottolander < leonard at den.ottolander.nl> wrote: > Hello Mike, > > On Wed, 2015-09-02 at 13:05 -0400, Mike - st257 wrote: > > I've been through the virt-install manpage a few times now to no avail. > > What is wrong with my syntax here (seen below)? > > > ~]# virt-install --connect qemu:///system -n blahhost -r2048 --vcpus=4 > > --arch=x86_64 --video qxl --graphics spice,port=5931 --noautoconsole > > --os-type linux --accelerate --network=bridge:kickstart_br0 --hvm --disk > > path=/dev/vmdisks/fedora-test2,bus=virtio --cdrom /tmp/fedora.iso > > To also reply to nevis2us: I have the Spice TLS config commented presently so it is not active (afaik). At one point I did try switching the value from 1 to 0 when I did have it uncommented. > See if adding tlsport=0 to the --graphics option fixes your problem? > > --graphics spice,port=5931,tlsport=0 > I did try that before (though didn't note it in my first message). ERROR Error in graphics device parameters: TLS port must be a number between 5900 and 65535, or -1 for auto allocation ~]# cat /etc/redhat-release CentOS release 6.7 (Final) ~]# yum info libvirt | egrep 'Name|Version|Release' Name : libvirt Version : 0.10.2 Release : 54.el6 > > Compare > http://www.spice-space.org/page/Features/Xspice#--tls-port_0_required > Any other thoughts? :-/ I can't be the only person that wants to use Spice with out TLS for some testing/labbing. ;-) Thanks! -- ---~~.~~--- Mike // SilverTip257 //