[CentOS] Libreswan PEM format
Eero Volotinen
eero.volotinen at iki.fi
Fri Apr 1 17:39:53 UTC 2016
IPSec is very complex with certificates. try first with PSK authentication
and then with certificates
--
Eero
2016-04-01 20:21 GMT+03:00 Glenn Pierce <glennpierce at gmail.com>:
> I generated according to the docs . Which produced
> my server.secrets as below
>
> used the command
>
> ipsec newhostkey --configdir /etc/ipsec.d --output
> /etc/ipsec.d/www.example.com.secrets
>
>
> : RSA {
> # RSA 3328 bits ***.**.net Fri Apr 1 15:39:32 2016
> # for signatures only, UNSAFE FOR ENCRYPTION
>
> #pubkey=0sAQPs3gZ6GBRJSoy/6RxrL/cMv0JnYEKR/SYmXUCVlkBFNi2D7VJsa17ffvmBUjLLD6/T72M31JvlPhkSzK/YSPpoh8hNtSB4IDlD2WGks+hYlnQ4ZSOaj5LHFRFochUVQAiSWgx4OnvI9cYrj+rDZL/0vtGeLDJiLeTSj3DLfWCi2DG/LzZ1ukQMQCETMb6vZ9YcC21iQUNxEHLVJlTSltVdpyWnWfKvoQ9K3NFiVVsXZ0+puQCHWJqp1OQtesaSCQNzeUgjmhm5W+kVzQ1NkeCz6Me0iQEIzH+b6gdJrjRzgwhU1ZRXfthP4QiIANh9C9uI2VGj1tM05qXm2Ps9KZiholyQSKmjZNXU1RBzQdc2T09WsGRBPFprH8k3nN2MpWkWj1Tljawx7uRoCWtH0UkOhe04kPzZ4M5CHplNEM7fO05DraRt7F99oN2cYuRHCzLD53QwdS8ptw3G1FCiSK7+v3klE0zemBToknFAT5Oy5XiHILLkNccjXmJ12eyw1qUX/jM7r+COGQQfefYbv8fokxJy+dSB2JmPqOT05ssvMw==
> Modulus:
>
> 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
> PublicExponent: 0x03
> # everything after this point is CKA_ID in hex format - not
> the real values
> PrivateExponent: 0x3d2c8bd4f34e4a395a5f57dd3d2211c8cbb82514
> Prime1: 0x3d2c8bd4f34e4a395a5f57dd3d2211c8cbb82514
> Prime2: 0x3d2c8bd4f34e4a395a5f57dd3d2211c8cbb82514
> Exponent1: 0x3d2c8bd4f34e4a395a5f57dd3d2211c8cbb82514
> Exponent2: 0x3d2c8bd4f34e4a395a5f57dd3d2211c8cbb82514
> Coefficient: 0x3d2c8bd4f34e4a395a5f57dd3d2211c8cbb82514
> CKAIDNSS: 0x3d2c8bd4f34e4a395a5f57dd3d2211c8cbb82514
> }
> # do not change the indenting of that "}"
>
> On 1 April 2016 at 18:04, Eero Volotinen <eero.volotinen at iki.fi> wrote:
> > You must define connection address and key in ipsec.secrets.
> >
> > --
> > Eero
> >
> >
> > 2016-04-01 19:38 GMT+03:00 Glenn Pierce <glennpierce at gmail.com>:
> >
> >> Just trying to follow the instructions here
> >>
> >>
> https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/7/html/Security_Guide/sec-Securing_Virtual_Private_Networks.html
> >>
> >> I don't think I am doing anything special.
> >>
> >> At the point where there is some communication going on
> >>
> >> Getting this error
> >>
> >> packet from *****:1024: received Vendor ID payload [Cisco-Unity]
> >> Apr 01 17:33:44 carneab4.memset.net pluto[15986]: packet from
> >> ***:1024: received Vendor ID payload [Dead Peer Detection]
> >> Apr 01 17:33:44 carneab4.memset.net pluto[15986]: packet from ***
> >> :1024: initial Main Mode message received on ****:500 but no
> >> connection has been authorized with policy RSASIG+IKEV1_ALLOW
> >>
> >> The errors are so vague.
> >> Not sure what the problem is now
> >>
> >>
> >>
> >> My conf
> >>
> >>
> >>
> >> conn tunnel
> >> #phase2alg=aes256-sha1;modp1024
> >> keyexchange=ike
> >> #ike=aes256-sha1;modp1024
> >> left=192.168.1.122
> >> leftnexthop=81.129.247.152 # My ISP assigned external ip adresss
> >> (I am testing at home)
> >>
> >>
> leftrsasigkey=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
> >> right=89.200.134.211
> >>
> >>
> rightrsasigkey=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
> >> authby=secret|rsasig
> >> # load and initiate automatically
> >> auto=start
> >>
> >> conn site1
> >> also=tunnel
> >> leftsubnet=10.0.128.0/22
> >> rightsubnet=192.168.1.222/32
> >>
> >> conn site2
> >> also=tunnel
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> On 1 April 2016 at 15:58, Eero Volotinen <eero.volotinen at iki.fi> wrote:
> >> > So you are using pkcs12 on centos:
> >> >
> >> > https://www.sslshopper.com/article-most-common-openssl-commands.html
> >> > --
> >> > Eero
> >> >
> >> > 2016-04-01 17:44 GMT+03:00 Glenn Pierce <glennpierce at gmail.com>:
> >> >
> >> >> Sorry but I have looked for over two days. Trying every command I
> could
> >> >> find.
> >> >>
> >> >> There is obviously a misunderstanding somewhere.
> >> >>
> >> >> After generating a key pair with
> >> >> ipsec newhostkey --configdir /etc/ipsec.d --output
> >> /etc/ipsec.d/my.secrets
> >> >>
> >> >> I exported to a file with
> >> >> ipsec showhostkey --ipseckey > file
> >> >>
> >> >> The man pages says
> >> >> ipsec showhostkey outputs in ipsec.conf(5) format,
> >> >>
> >> >> Ie
> >> >>
> >> >>
> >> >> ***.server.net. IN IPSECKEY 10 0 2 .
> >> >>
> >> >>
> >>
> 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
> >> >>
> >> >>
> >> >> is this the format openssl is meant to beable to convert ? or is the
> >> >> an intermediate step I am missing as like I said not command I found
> >> >> seems to work.
> >> >>
> >> >>
> >> >> On 1 April 2016 at 14:35, Eero Volotinen <eero.volotinen at iki.fi>
> wrote:
> >> >> > It works, try googling for openssl pem conversion
> >> >> > 1.4.2016 4.32 ip. "Glenn Pierce" <glennpierce at gmail.com>
> kirjoitti:
> >> >> >
> >> >> >> I have tried
> >> >> >> openssl rsa -in bicester_left.pub -outform pem > bicester_left.pem
> >> >> >>
> >> >> >> I get
> >> >> >> unable to load Private Key
> >> >> >> 140372295030648:error:0906D06C:PEM routines:PEM_read_bio:no start
> >> >> >> line:pem_lib.c:701:Expecting: ANY PRIVATE KEY
> >> >> >>
> >> >> >>
> >> >> >>
> >> >> >> On 1 April 2016 at 13:59, Eero Volotinen <eero.volotinen at iki.fi>
> >> wrote:
> >> >> >> > You can do any kind of format conversions with openssl
> commandline
> >> >> >> client.
> >> >> >> >
> >> >> >> > Eero
> >> >> >> > 1.4.2016 3.56 ip. "Glenn Pierce" <glennpierce at gmail.com>
> >> kirjoitti:
> >> >> >> >
> >> >> >> >> Hi I am trying to setup a libreswan vpn between centos 7 and a
> >> >> Mikrotik
> >> >> >> >> router.
> >> >> >> >>
> >> >> >> >> I am try to get the keys working. My problem is the Mikrotik
> >> router
> >> >> >> >> wants the key in PEM format
> >> >> >> >>
> >> >> >> >> How do I export the keys generated with ipsec newhostkey
> >> >> >> >> into PEM format ?
> >> >> >> >>
> >> >> >> >>
> >> >> >> >> Thanks
> >> >> >> >> _______________________________________________
> >> >> >> >> CentOS mailing list
> >> >> >> >> CentOS at centos.org
> >> >> >> >> https://lists.centos.org/mailman/listinfo/centos
> >> >> >> >>
> >> >> >> > _______________________________________________
> >> >> >> > CentOS mailing list
> >> >> >> > CentOS at centos.org
> >> >> >> > https://lists.centos.org/mailman/listinfo/centos
> >> >> >> _______________________________________________
> >> >> >> CentOS mailing list
> >> >> >> CentOS at centos.org
> >> >> >> https://lists.centos.org/mailman/listinfo/centos
> >> >> >>
> >> >> > _______________________________________________
> >> >> > CentOS mailing list
> >> >> > CentOS at centos.org
> >> >> > https://lists.centos.org/mailman/listinfo/centos
> >> >> _______________________________________________
> >> >> CentOS mailing list
> >> >> CentOS at centos.org
> >> >> https://lists.centos.org/mailman/listinfo/centos
> >> >>
> >> > _______________________________________________
> >> > CentOS mailing list
> >> > CentOS at centos.org
> >> > https://lists.centos.org/mailman/listinfo/centos
> >> _______________________________________________
> >> CentOS mailing list
> >> CentOS at centos.org
> >> https://lists.centos.org/mailman/listinfo/centos
> >>
> > _______________________________________________
> > CentOS mailing list
> > CentOS at centos.org
> > https://lists.centos.org/mailman/listinfo/centos
> _______________________________________________
> CentOS mailing list
> CentOS at centos.org
> https://lists.centos.org/mailman/listinfo/centos
>
More information about the CentOS
mailing list