[CentOS] KVM Virtualization Network VLAN CentOS7

FrancisM

francis at mytechrepublic.com
Thu Apr 7 08:20:20 UTC 2016


On Thu, Apr 7, 2016 at 1:51 PM, FrancisM <francis at mytechrepublic.com> wrote:

>
>
> On Thu, Apr 7, 2016 at 1:26 PM, Subscriber <ml-lists at agoris.net.ua> wrote:
>
>> Hello FrancisM,
>>
>> Thursday, April 7, 2016, 8:03:38 AM, you wrote:
>>
>>
>> > I tried last night and it seems like the vlans that I created is
>> failing to
>> > bring-up. So this is what Im doing
>>
>> > in my DATA trunk port at my HomeLab Im doing this
>>
>> > 2 port configured for teaming1 (set as link only port) -> Create Bridge
>> > (br0 port) on top of the teaming1 -> create slave vlan10,20,30,40 and
>> the
>> > parent is br0. Am I doing this correctly? Thanks
>>
>> not exactly.
>>
>> nmcli connection add con-name br10 ifname br10 type bridge stp no
>> nmcli connection down br10
>> nmcli connection edit br10
>> set ipv4.method disabled
>> set ipv6.method ignore
>> save
>> quit
>> nmcli connection up br10
>>
>> nmcli  connection  add  con-name  vlan10  ifname  vlan10 type vlan dev
>> teaming1 id 10
>> nmcli connection down vlan10
>> nmcli connection edit vlan10
>> set connection.master br10
>> set connection.slave-type bridge
>> verify fix
>> save
>> exit
>> nmcli connection up vlan10
>>
>> similarly for br20+vlan20, br30+vlan30, br40+vlan40
>>
>> _______________________________________________
>> CentOS mailing list
>> CentOS at centos.org
>> https://lists.centos.org/mailman/listinfo/centos
>>
>
> Thanks for providing the command I will definitely try this method.
>
>
Hi,

After trying the method using the 'nmcli'  its the same error result as
what I encountered in using the 'nmtui' by the way after configuring then
check it in the nmtui its the same configuration as what I have done
earlier.

[root at server network-scripts]# systemctl status network.service -l
● network.service - LSB: Bring up/down networking
   Loaded: loaded (/etc/rc.d/init.d/network)
   Active: failed (Result: exit-code) since Tue 2015-04-07 17:19:00 SGT;
1min 13s ago
     Docs: man:systemd-sysv-generator(8)
  Process: 48732 ExecStop=/etc/rc.d/init.d/network stop (code=exited,
status=0/SUCCESS)
  Process: 49302 ExecStart=/etc/rc.d/init.d/network start (code=exited,
status=1/FAILURE)

Apr 07 17:17:28 server network[49302]: [  OK  ]
Apr 07 17:17:29 server network[49302]: Bringing up interface
team1_slave_enp5s0f1:  Connection successfully activated (D-Bus active
path: /org/freedesktop/NetworkManager/ActiveConnection/69)
Apr 07 17:17:29 server network[49302]: [  OK  ]
Apr 07 17:19:00 server network[49302]: *Bringing up interface vlan247:
Error: Timeout 90 sec expired.*
Apr 07 17:19:00 server network[49302]: *[FAILED]*
Apr 07 17:19:00 server network[49302]: Bringing up interface br247:  [  OK
]
Apr 07 17:19:00 server systemd[1]: network.service: control process exited,
code=exited status=1
Apr 07 17:19:00 server systemd[1]: Failed to start LSB: Bring up/down
networking.
Apr 07 17:19:00 server systemd[1]: Unit network.service entered failed
state.
Apr 07 17:19:00 server systemd[1]: network.service failed.
[root at server network-scripts]#

I will try to use other configuration on this bridge. Does it matter if I
use TEAMING and not BONDING on this bridging configuration because the two
nic card that is trunk is configured as TEAMING in my CentOS7



More information about the CentOS mailing list