On Tue, 23 Aug 2016 at 02:18 Gordon Messmer <gordon.messmer at gmail.com> wrote: > On 08/21/2016 11:56 PM, Phil Manuel wrote: > > part /boot/efi --fstype="efi" --size=200 --ondisk=sda > > And I have tried the latter with location as mbr still fails > > What am I missing ? > > > I very vaguely remember struggling with this as well, but I can't find > my notes from that work at the moment. > > My kickstart files for non-RAID UEFI boots use something like this: > > bootloader --location=mbr --append="net.ifnames=0 biosdevname=0" > part /boot/efi --ondrive=sda --fstype=efi --label EFI > part /boot --fstype=ext4 --ondrive=sda > ... > > > My memory is really fuzzy, but if I remember right, this didn't work > when I didn't specify "--label EFI" or some other really silly thing. I > think I resolved the problem by doing a manual install and then working > with the anaconda.ks file until I was satisfied. > OK So I tried your suggestion no joy. Installed i manually. Took the kickstart file from this install, and tried to use this as the install kickstart. It failed. I deleted all the partitions and tried again no joy, the default ks is as follows:- #version=DEVEL # Use network installation url --url="http://192.168.0.156/CentOS7-x86_64/disc1/" # Use text mode install text ignoredisk --only-use=sda,sdb # Keyboard layouts keyboard --vckeymap=us --xlayouts='us' # System language lang en_US.UTF-8 # Network information network --bootproto=dhcp --device=enp0s31f6 --ipv6=auto --activate network --hostname=localhost.localdomain # Root password rootpw --iscrypted # Do not configure the X Window System skipx # System timezone timezone Australia/Sydney # System bootloader configuration bootloader --append=" crashkernel=auto" --location=mbr --boot-drive=sda autopart --type=lvm # Partition clearing information clearpart --all --initlabel --drives=sda,sdb %packages @core kexec-tools %end %addon com_redhat_kdump --enable --reserve-mb='auto' %end Should I need to change anything to this ? Thanks