[CentOS] No GUI with CentOS-7.2

Wed Jan 6 13:21:36 UTC 2016
Timothy Murphy <gayleard at eircom.net>

Timothy Murphy wrote:

> Sylvain CANOINE wrote:
> 
>> Could you share your whole Xorg.0.log ? Do you use a custom xorg.conf, or
>> custom xorg.conf.d files ? Opensource Ati driver, ou proprietary blobs ?
> 
> Thank you for your interest.
> I am running CentOS-7 installed from CentOS-7-x86_64-LiveKDE-1503.iso
> and later upgraded to CentOS-7.2.
> The only packages I have installed have been from CentOS and Epel repos.
> I'm sure the ATI Radeon driver is open-source.
> The Radeon firmware comes from the kernel-firmware package -
> I don't know if any of that is proprietary?
> There is no xorg.conf file,
> I assume this is replaced by /usr/share/X11/xorg.conf.d/* .
> 
> I'm attaching Xorg.0.log - I don't know if that is allowed here?

I see that attachments are not allowed.
I'll try posting Xorg.0.log here -
I've deleted an enormous list of Radeon chipsets,
leaving only the one applicable in my case:
======================================
[ 28214.668] 
X.Org X Server 1.17.2
Release Date: 2015-06-16
[ 28214.668] X Protocol Version 11, Revision 0
[ 28214.668] Build Operating System:  2.6.32-220.17.1.el6.x86_64 
[ 28214.668] Current Operating System: Linux alfred.gayleard.eu.localdomain 
3.10.0-327.3.1.el7.x86_64 #1 SMP Wed Dec 9 14:09:15 UTC 2015 x86_64
[ 28214.669] Kernel command line: 
BOOT_IMAGE=/boot/vmlinuz-3.10.0-327.3.1.el7.x86_64 
root=UUID=370b44c7-9422-43af-bed9-a797c10bcbf7 ro vconsole.font=latarcyrheb-
sun16 vconsole.keymap=ie crashkernel=auto rhgb quiet 
initcall_blacklist=clocksource_done_booting
[ 28214.669] Build Date: 20 November 2015  02:44:25PM
[ 28214.669] Build ID: xorg-x11-server 1.17.2-10.el7 
[ 28214.669] Current version of pixman: 0.32.6
[ 28214.669]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[ 28214.669] Markers: (--) probed, (**) from config file, (==) default 
setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 28214.669] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan  4 23:31:21 
2016
[ 28214.670] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 28214.670] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 28214.671] (==) No Layout section.  Using the first Screen section.
[ 28214.671] (==) No screen section available. Using defaults.
[ 28214.671] (**) |-->Screen "Default Screen Section" (0)
[ 28214.671] (**) |   |-->Monitor "<default monitor>"
[ 28214.671] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[ 28214.671] (==) Automatically adding devices
[ 28214.671] (==) Automatically enabling devices
[ 28214.671] (==) Automatically adding GPU devices
[ 28214.671] (==) FontPath set to:
        catalogue:/etc/X11/fontpath.d,
        built-ins
[ 28214.671] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 28214.671] (II) The server relies on udev to provide the list of input 
devices.
        If no devices become available, reconfigure udev or disable 
AutoAddDevices.
[ 28214.671] (II) Loader magic: 0x7fc8e5fad020
[ 28214.671] (II) Module ABI versions:
[ 28214.671]    X.Org ANSI C Emulation: 0.4
[ 28214.671]    X.Org Video Driver: 19.0
[ 28214.671]    X.Org XInput driver : 21.0
[ 28214.671]    X.Org Server Extension : 9.0
[ 28214.672] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 28214.674] (--) PCI:*(0:1:5:0) 1002:9712:103c:1609 rev 0, Mem @ 
0xf0000000/134217728, 0xfe7f0000/65536, 0xfe600000/1048576, I/O @ 
0x0000d000/256, BIOS @ 0x????????/131072
[ 28214.674] (II) LoadModule: "glx"
[ 28214.674] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 28214.677] (II) Module glx: vendor="X.Org Foundation"
[ 28214.677]    compiled for 1.17.2, module version = 1.0.0
[ 28214.677]    ABI class: X.Org Server Extension, version 9.0
[ 28214.677] (==) AIGLX enabled
[ 28214.677] (==) Matched ati as autoconfigured driver 0
[ 28214.677] (==) Matched ati as autoconfigured driver 1
[ 28214.678] (==) Matched modesetting as autoconfigured driver 2
[ 28214.678] (==) Matched fbdev as autoconfigured driver 3
[ 28214.678] (==) Matched vesa as autoconfigured driver 4
[ 28214.678] (==) Assigned the driver to the xf86ConfigLayout
[ 28214.678] (II) LoadModule: "ati"
[ 28214.678] (II) Loading /usr/lib64/xorg/modules/drivers/ati_drv.so
[ 28214.678] (II) Module ati: vendor="X.Org Foundation"
[ 28214.678]    compiled for 1.17.2, module version = 7.5.0
[ 28214.678]    Module class: X.Org Video Driver
[ 28214.678]    ABI class: X.Org Video Driver, version 19.0
[ 28214.678] (II) LoadModule: "radeon"
[ 28214.678] (II) Loading /usr/lib64/xorg/modules/drivers/radeon_drv.so
[ 28214.679] (II) Module radeon: vendor="X.Org Foundation"
[ 28214.679]    compiled for 1.17.2, module version = 7.5.0
[ 28214.679]    Module class: X.Org Video Driver
[ 28214.679]    ABI class: X.Org Video Driver, version 19.0
[ 28214.679] (II) LoadModule: "modesetting"
[ 28214.679] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[ 28214.679] (II) Module modesetting: vendor="X.Org Foundation"
[ 28214.679]    compiled for 1.17.2, module version = 1.17.2
[ 28214.679]    Module class: X.Org Video Driver
[ 28214.679]    ABI class: X.Org Video Driver, version 19.0
[ 28214.679] (II) LoadModule: "fbdev"
[ 28214.679] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
[ 28214.679] (II) Module fbdev: vendor="X.Org Foundation"
[ 28214.679]    compiled for 1.17.2, module version = 0.4.3
[ 28214.679]    Module class: X.Org Video Driver
[ 28214.679]    ABI class: X.Org Video Driver, version 19.0
[ 28214.679] (II) LoadModule: "vesa"
[ 28214.679] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[ 28214.680] (II) Module vesa: vendor="X.Org Foundation"
[ 28214.680]    compiled for 1.17.2, module version = 2.3.2
[ 28214.680]    Module class: X.Org Video Driver
[ 28214.680]    ABI class: X.Org Video Driver, version 19.0
[ 28214.680] (II) RADEON: Driver for ATI Radeon chipsets:
        ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
... many chipsets removed
[ 28214.687] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 28214.687] (II) FBDEV: driver for framebuffer: fbdev
[ 28214.687] (II) VESA: driver for VESA chipsets: vesa
[ 28214.688] (--) using VT number 2

[ 28214.710] (II) [KMS] Kernel modesetting enabled.
[ 28214.710] (WW) Falling back to old probe method for modesetting
[ 28214.710] (WW) Falling back to old probe method for fbdev
[ 28214.710] (II) Loading sub module "fbdevhw"
[ 28214.710] (II) LoadModule: "fbdevhw"
[ 28214.710] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
[ 28214.711] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 28214.711]    compiled for 1.17.2, module version = 0.0.2
[ 28214.711]    ABI class: X.Org Video Driver, version 19.0
[ 28214.711] (WW) Falling back to old probe method for vesa
[ 28214.711] (II) RADEON(0): Creating default Display subsection in Screen 
section
        "Default Screen Section" for depth/fbbpp 24/32
[ 28214.711] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 28214.711] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp 
pixmaps)
[ 28214.711] (==) RADEON(0): Default visual is TrueColor
[ 28214.711] (==) RADEON(0): RGB weight 888
[ 28214.711] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 28214.711] (--) RADEON(0): Chipset: "ATI Mobility Radeon HD 4200" (ChipID 
= 0x9712)
[ 28214.711] (II) Loading sub module "dri2"
[ 28214.711] (II) LoadModule: "dri2"
[ 28214.711] (II) Module "dri2" already built-in
[ 28214.711] (II) Loading sub module "exa"
[ 28214.711] (II) LoadModule: "exa"
[ 28214.711] (II) Loading /usr/lib64/xorg/modules/libexa.so
[ 28214.711] (II) Module exa: vendor="X.Org Foundation"
[ 28214.711]    compiled for 1.17.2, module version = 2.6.0
[ 28214.711]    ABI class: X.Org Video Driver, version 19.0
[ 28214.711] (II) RADEON(0): KMS Color Tiling: enabled
[ 28214.712] (II) RADEON(0): KMS Color Tiling 2D: enabled
[ 28214.712] (II) RADEON(0): KMS Pageflipping: enabled
[ 28214.712] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 28214.743] (II) RADEON(0): Output VGA-0 has no monitor section
[ 28214.774] (II) RADEON(0): EDID for output VGA-0
[ 28214.774] (II) RADEON(0): Manufacturer: IQT  Model: 703  Serial#: 5010
[ 28214.774] (II) RADEON(0): Year: 2004  Week: 8
[ 28214.774] (II) RADEON(0): EDID Version: 1.3
[ 28214.774] (II) RADEON(0): Analog Display Input,  Input Voltage Level: 
0.700/0.300 V
[ 28214.774] (II) RADEON(0): Sync:  Separate
[ 28214.774] (II) RADEON(0): Max Image Size [cm]: horiz.: 33  vert.: 27
[ 28214.774] (II) RADEON(0): Gamma: 2.20
[ 28214.774] (II) RADEON(0): DPMS capabilities: StandBy Suspend Off; 
RGB/Color Display
[ 28214.774] (II) RADEON(0): First detailed timing not preferred mode in 
violation of standard!
[ 28214.774] (II) RADEON(0): redX: 0.640 redY: 0.340   greenX: 0.290 greenY: 
0.610
[ 28214.774] (II) RADEON(0): blueX: 0.140 blueY: 0.070   whiteX: 0.310 
whiteY: 0.330
[ 28214.774] (II) RADEON(0): Supported established timings:
[ 28214.774] (II) RADEON(0): 720x400 at 70Hz
[ 28214.774] (II) RADEON(0): 640x480 at 60Hz
[ 28214.774] (II) RADEON(0): 640x480 at 75Hz
[ 28214.774] (II) RADEON(0): 800x600 at 60Hz
[ 28214.774] (II) RADEON(0): 800x600 at 75Hz
[ 28214.774] (II) RADEON(0): 1024x768 at 60Hz
[ 28214.774] (II) RADEON(0): 1024x768 at 70Hz
[ 28214.774] (II) RADEON(0): 1024x768 at 75Hz
[ 28214.774] (II) RADEON(0): 1280x1024 at 75Hz
[ 28214.774] (II) RADEON(0): Manufacturer's mask: 0
[ 28214.775] (II) RADEON(0): Supported standard timings:
[ 28214.775] (II) RADEON(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 
32897
[ 28214.775] (II) RADEON(0): Supported detailed timing:
[ 28214.775] (II) RADEON(0): clock: 108.0 MHz   Image Size:  330 x 270 mm
[ 28214.775] (II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 
h_blank_end 1688 h_border: 0
[ 28214.775] (II) RADEON(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 
v_blanking: 1066 v_border: 0
[ 28214.775] (II) RADEON(0): Supported detailed timing:
[ 28214.775] (II) RADEON(0): clock: 28.3 MHz   Image Size:  330 x 270 mm
[ 28214.775] (II) RADEON(0): h_active: 720  h_sync: 738  h_sync_end 846 
h_blank_end 900 h_border: 0
[ 28214.775] (II) RADEON(0): v_active: 400  v_sync: 413  v_sync_end 415 
v_blanking: 449 v_border: 0
[ 28214.775] (II) RADEON(0): Supported detailed timing:
[ 28214.775] (II) RADEON(0): clock: 25.2 MHz   Image Size:  330 x 270 mm
[ 28214.775] (II) RADEON(0): h_active: 640  h_sync: 656  h_sync_end 752 
h_blank_end 800 h_border: 0
[ 28214.775] (II) RADEON(0): v_active: 480  v_sync: 490  v_sync_end 492 
v_blanking: 525 v_border: 0
[ 28214.775] (II) RADEON(0): Monitor name: L70S
[ 28214.775] (II) RADEON(0): EDID (in hex):
[ 28214.775] (II) RADEON(0):    00ffffffffffff002634030792130000
[ 28214.775] (II) RADEON(0):    080e010308211b78e8c5c6a3574a9c23
[ 28214.775] (II) RADEON(0):    124f54a54f0081800101010101010101
[ 28214.775] (II) RADEON(0):    010101010101302a009851002a403070
[ 28214.775] (II) RADEON(0):    13004a0e1100001e100bd0b420903110
[ 28214.775] (II) RADEON(0):    126cd2004a0e1100001cd50980a020e0
[ 28214.775] (II) RADEON(0):    2d101060a2004a0e11000018000000fc
[ 28214.775] (II) RADEON(0):    004c3730530a202020202020202000d3
[ 28214.775] (II) RADEON(0): Printing probed modes for output VGA-0
[ 28214.775] (II) RADEON(0): Modeline "1280x1024"x75.0  135.00  1280 1296 
1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 28214.775] (II) RADEON(0): Modeline "1280x1024"x60.0  108.00  1280 1328 
1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 28214.775] (II) RADEON(0): Modeline "1024x768"x75.1   78.80  1024 1040 
1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 28214.775] (II) RADEON(0): Modeline "1024x768"x70.1   75.00  1024 1048 
1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 28214.775] (II) RADEON(0): Modeline "1024x768"x60.0   65.00  1024 1048 
1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 28214.775] (II) RADEON(0): Modeline "800x600"x75.0   49.50  800 816 896 
1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 28214.775] (II) RADEON(0): Modeline "800x600"x60.3   40.00  800 840 968 
1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 28214.775] (II) RADEON(0): Modeline "640x480"x75.0   31.50  640 656 720 
840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 28214.775] (II) RADEON(0): Modeline "640x480"x60.0   25.20  640 656 752 
800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 28214.775] (II) RADEON(0): Modeline "640x480"x59.9   25.17  640 656 752 
800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 28214.775] (II) RADEON(0): Modeline "720x400"x70.1   28.32  720 738 846 
900  400 413 415 449 -hsync +vsync (31.5 kHz e)
[ 28214.775] (II) RADEON(0): Modeline "720x400"x70.1   28.32  720 738 846 
900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 28214.775] (II) RADEON(0): Output VGA-0 connected
[ 28214.775] (II) RADEON(0): Using exact sizes for initial modes
[ 28214.775] (II) RADEON(0): Output VGA-0 using initial mode 1280x1024 +0+0
[ 28214.775] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless 
otherwise stated.
[ 28214.775] (II) RADEON(0): mem size init: gart size :1fdee000 vram size: 
s:8000000 visible:77a7000
[ 28214.775] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 28214.775] (==) RADEON(0): DPI set to (96, 96)
[ 28214.775] (II) Loading sub module "fb"
[ 28214.775] (II) LoadModule: "fb"
[ 28214.775] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 28214.776] (II) Module fb: vendor="X.Org Foundation"
[ 28214.776]    compiled for 1.17.2, module version = 1.0.0
[ 28214.776]    ABI class: X.Org ANSI C Emulation, version 0.4
[ 28214.776] (II) Loading sub module "ramdac"
[ 28214.776] (II) LoadModule: "ramdac"
[ 28214.776] (II) Module "ramdac" already built-in
[ 28214.776] (II) UnloadModule: "modesetting"
[ 28214.776] (II) Unloading modesetting
[ 28214.776] (II) UnloadModule: "fbdev"
[ 28214.776] (II) Unloading fbdev
[ 28214.776] (II) UnloadSubModule: "fbdevhw"
[ 28214.776] (II) Unloading fbdevhw
[ 28214.776] (II) UnloadModule: "vesa"
[ 28214.776] (II) Unloading vesa
[ 28214.776] (--) Depth 24 pixmap format is 32 bpp
[ 28214.776] (II) RADEON(0): [DRI2] Setup complete
[ 28214.776] (II) RADEON(0): [DRI2]   DRI driver: r600
[ 28214.776] (II) RADEON(0): [DRI2]   VDPAU driver: r600
[ 28214.777] (II) RADEON(0): Front buffer size: 5120K
[ 28214.777] (II) RADEON(0): VRAM usage limit set to 105634K
[ 28214.777] (==) RADEON(0): Backing store enabled
[ 28214.777] (II) RADEON(0): Direct rendering enabled
[ 28214.777] (II) EXA(0): Driver allocated offscreen pixmaps
[ 28214.777] (II) EXA(0): Driver registered support for the following 
operations:
[ 28214.777] (II)         Solid
[ 28214.777] (II)         Copy
[ 28214.777] (II)         Composite (RENDER acceleration)
[ 28214.777] (II)         UploadToScreen
[ 28214.777] (II)         DownloadFromScreen
[ 28214.777] (II) RADEON(0): Acceleration enabled
[ 28214.777] (==) RADEON(0): DPMS enabled
[ 28214.777] (==) RADEON(0): Silken mouse enabled
[ 28214.777] (II) RADEON(0): Set up textured video
[ 28214.777] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[ 28214.777] (II) RADEON(0): [XvMC] Extension initialized.
[ 28214.777] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR 
disabled message.
[ 28214.778] (--) RandR disabled
[ 28214.789] (II) SELinux: Disabled by boolean
[ 28214.803] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 28214.803] (II) AIGLX: enabled GLX_ARB_create_context
[ 28214.803] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 28214.803] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 28214.803] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 28214.803] (II) AIGLX: enabled GLX_SGI_swap_control and 
GLX_MESA_swap_control
[ 28214.803] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 28214.803] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 28214.803] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer 
objects
[ 28214.805] (II) AIGLX: Loaded and initialized r600
[ 28214.805] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 28214.807] (II) RADEON(0): Setting screen physical size to 338 x 270
[ 28214.875] (II) config/udev: Adding input device Power Button 
(/dev/input/event1)
[ 28214.875] (**) Power Button: Applying InputClass "evdev keyboard 
catchall"
[ 28214.875] (**) Power Button: Applying InputClass "system-keyboard"
[ 28214.875] (II) LoadModule: "evdev"
[ 28214.876] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 28214.876] (II) Module evdev: vendor="X.Org Foundation"
[ 28214.877]    compiled for 1.17.2, module version = 2.9.2
[ 28214.877]    Module class: X.Org XInput Driver
[ 28214.877]    ABI class: X.Org XInput driver, version 21.0
[ 28214.877] (II) Using input driver 'evdev' for 'Power Button'
[ 28214.877] (**) Power Button: always reports core events
[ 28214.877] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 28214.877] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 28214.877] (--) evdev: Power Button: Found keys
[ 28214.877] (II) evdev: Power Button: Configuring as keyboard
[ 28214.877] (**) Option "config_info" 
"udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 28214.877] (II) XINPUT: Adding extended input device "Power Button" (type: 
KEYBOARD, id 6)
[ 28214.877] (**) Option "xkb_rules" "evdev"
[ 28214.877] (**) Option "xkb_layout" "ie"
[ 28214.921] (II) config/udev: Adding input device Power Button 
(/dev/input/event0)
[ 28214.921] (**) Power Button: Applying InputClass "evdev keyboard 
catchall"
[ 28214.921] (**) Power Button: Applying InputClass "system-keyboard"
[ 28214.921] (II) Using input driver 'evdev' for 'Power Button'
[ 28214.921] (**) Power Button: always reports core events
[ 28214.921] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 28214.921] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 28214.921] (--) evdev: Power Button: Found keys
[ 28214.921] (II) evdev: Power Button: Configuring as keyboard
[ 28214.921] (**) Option "config_info" 
"udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 28214.921] (II) XINPUT: Adding extended input device "Power Button" (type: 
KEYBOARD, id 7)
[ 28214.921] (**) Option "xkb_rules" "evdev"
[ 28214.921] (**) Option "xkb_layout" "ie"
[ 28214.923] (II) config/udev: Adding input device HID 04f3:0103 
(/dev/input/event3)
[ 28214.923] (**) HID 04f3:0103: Applying InputClass "evdev keyboard 
catchall"
[ 28214.923] (**) HID 04f3:0103: Applying InputClass "system-keyboard"
[ 28214.923] (II) Using input driver 'evdev' for 'HID 04f3:0103'
[ 28214.923] (**) HID 04f3:0103: always reports core events
[ 28214.923] (**) evdev: HID 04f3:0103: Device: "/dev/input/event3"
[ 28214.923] (--) evdev: HID 04f3:0103: Vendor 0x4f3 Product 0x103
[ 28214.923] (--) evdev: HID 04f3:0103: Found keys
[ 28214.923] (II) evdev: HID 04f3:0103: Configuring as keyboard
[ 28214.923] (**) Option "config_info" 
"udev:/sys/devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.0/input/input3/event3"
[ 28214.923] (II) XINPUT: Adding extended input device "HID 04f3:0103" 
(type: KEYBOARD, id 8)
[ 28214.923] (**) Option "xkb_rules" "evdev"
[ 28214.923] (**) Option "xkb_layout" "ie"
[ 28214.924] (II) config/udev: Adding input device HID 04f3:0103 
(/dev/input/event4)
[ 28214.924] (**) HID 04f3:0103: Applying InputClass "evdev keyboard 
catchall"
[ 28214.924] (**) HID 04f3:0103: Applying InputClass "system-keyboard"
[ 28214.924] (II) Using input driver 'evdev' for 'HID 04f3:0103'
[ 28214.924] (**) HID 04f3:0103: always reports core events
[ 28214.924] (**) evdev: HID 04f3:0103: Device: "/dev/input/event4"
[ 28214.924] (--) evdev: HID 04f3:0103: Vendor 0x4f3 Product 0x103
[ 28214.924] (--) evdev: HID 04f3:0103: Found 1 mouse buttons
[ 28214.924] (--) evdev: HID 04f3:0103: Found scroll wheel(s)
[ 28214.924] (--) evdev: HID 04f3:0103: Found relative axes
[ 28214.924] (II) evdev: HID 04f3:0103: Forcing relative x/y axes to exist.
[ 28214.924] (--) evdev: HID 04f3:0103: Found absolute axes
[ 28214.924] (II) evdev: HID 04f3:0103: Forcing absolute x/y axes to exist.
[ 28214.924] (--) evdev: HID 04f3:0103: Found keys
[ 28214.924] (II) evdev: HID 04f3:0103: Configuring as mouse
[ 28214.924] (II) evdev: HID 04f3:0103: Configuring as keyboard
[ 28214.924] (II) evdev: HID 04f3:0103: Adding scrollwheel support
[ 28214.924] (**) evdev: HID 04f3:0103: YAxisMapping: buttons 4 and 5
[ 28214.924] (**) evdev: HID 04f3:0103: EmulateWheelButton: 4, 
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 28214.924] (**) Option "config_info" 
"udev:/sys/devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.1/input/input4/event4"
[ 28214.925] (II) XINPUT: Adding extended input device "HID 04f3:0103" 
(type: KEYBOARD, id 9)
[ 28214.925] (**) Option "xkb_rules" "evdev"
[ 28214.925] (**) Option "xkb_layout" "ie"
[ 28214.925] (II) evdev: HID 04f3:0103: initialized for relative axes.
[ 28214.925] (WW) evdev: HID 04f3:0103: ignoring absolute axes.
[ 28214.925] (**) HID 04f3:0103: (accel) keeping acceleration scheme 1
[ 28214.925] (**) HID 04f3:0103: (accel) acceleration profile 0
[ 28214.925] (**) HID 04f3:0103: (accel) acceleration factor: 2.000
[ 28214.925] (**) HID 04f3:0103: (accel) acceleration threshold: 4
[ 28214.926] (II) config/udev: Adding input device PIXART USB OPTICAL MOUSE 
(/dev/input/event2)
[ 28214.926] (**) PIXART USB OPTICAL MOUSE: Applying InputClass "evdev 
pointer catchall"
[ 28214.926] (II) Using input driver 'evdev' for 'PIXART USB OPTICAL MOUSE'
[ 28214.926] (**) PIXART USB OPTICAL MOUSE: always reports core events
[ 28214.926] (**) evdev: PIXART USB OPTICAL MOUSE: Device: 
"/dev/input/event2"
[ 28214.977] (--) evdev: PIXART USB OPTICAL MOUSE: Vendor 0x93a Product 
0x2510
[ 28214.977] (--) evdev: PIXART USB OPTICAL MOUSE: Found 3 mouse buttons
[ 28214.977] (--) evdev: PIXART USB OPTICAL MOUSE: Found scroll wheel(s)
[ 28214.977] (--) evdev: PIXART USB OPTICAL MOUSE: Found relative axes
[ 28214.977] (--) evdev: PIXART USB OPTICAL MOUSE: Found x and y relative 
axes
[ 28214.977] (II) evdev: PIXART USB OPTICAL MOUSE: Configuring as mouse
[ 28214.977] (II) evdev: PIXART USB OPTICAL MOUSE: Adding scrollwheel 
support
[ 28214.977] (**) evdev: PIXART USB OPTICAL MOUSE: YAxisMapping: buttons 4 
and 5
[ 28214.977] (**) evdev: PIXART USB OPTICAL MOUSE: EmulateWheelButton: 4, 
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 28214.977] (**) Option "config_info" 
"udev:/sys/devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input2/event2"
[ 28214.977] (II) XINPUT: Adding extended input device "PIXART USB OPTICAL 
MOUSE" (type: MOUSE, id 10)
[ 28214.977] (II) evdev: PIXART USB OPTICAL MOUSE: initialized for relative 
axes.
[ 28214.977] (**) PIXART USB OPTICAL MOUSE: (accel) keeping acceleration 
scheme 1
[ 28214.977] (**) PIXART USB OPTICAL MOUSE: (accel) acceleration profile 0
[ 28214.977] (**) PIXART USB OPTICAL MOUSE: (accel) acceleration factor: 
2.000
[ 28214.977] (**) PIXART USB OPTICAL MOUSE: (accel) acceleration threshold: 
4
[ 28214.978] (II) config/udev: Adding input device PIXART USB OPTICAL MOUSE 
(/dev/input/mouse0)
[ 28214.978] (II) No input driver specified, ignoring this device.
[ 28214.978] (II) This device may have been added with another device file.
[ 28214.979] (II) config/udev: Adding input device PC Speaker 
(/dev/input/event5)
[ 28214.979] (II) No input driver specified, ignoring this device.
[ 28214.979] (II) This device may have been added with another device file.
[ 28215.452] (II) evdev: PIXART USB OPTICAL MOUSE: Close
[ 28215.452] (II) UnloadModule: "evdev"
[ 28215.452] (II) evdev: HID 04f3:0103: Close
[ 28215.452] (II) UnloadModule: "evdev"
[ 28215.452] (II) evdev: HID 04f3:0103: Close
[ 28215.452] (II) UnloadModule: "evdev"
[ 28215.452] (II) evdev: Power Button: Close
[ 28215.452] (II) UnloadModule: "evdev"
[ 28215.452] (II) evdev: Power Button: Close
[ 28215.452] (II) UnloadModule: "evdev"
[ 28215.495] (II) Server terminated successfully (0). Closing log file.
======================================

If this is allowed, any advice gratefully received.


-- 
Timothy Murphy  
gayleard /at/ eircom.net
School of Mathematics, Trinity College, Dublin