[CentOS] LSI SATA MegaRaid & Centos 7 build 1511

Thu Jul 28 23:00:05 UTC 2016
John R Pierce <pierce at hogranch.com>

On 7/28/2016 3:41 PM, Fawzy Ibrahim wrote:
> LSI SATA MEGARAID 95Q9

afaik, the megaraid cards are mostly all SAS, which support SATA drives, 
except very old ones were SCSI.

Ok, I do see they had a series of MegaRAID SATA 150-xx and 300-xx cards, 
these were 64 bit PCI or PCI-X cards.

95Q9 does not appear to be a valid card number, 9240, 9260, 9280 are 
some pci-express SAS MegaRaid cards....

if you want help, please don't guess what you have, figure out what it 
actually is.    the output of `lspci -nn` will identify all boards in 
your system, for instance...

# lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation 5520 I/O Hub to ESI Port 
[8086:3406] (rev 13)
00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI 
Express Root Port 1 [8086:3408] (rev 13)
00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI 
Express Root Port 3 [8086:340a] (rev 13)
00:07.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI 
Express Root Port 7 [8086:340e] (rev 13)
00:09.0 PCI bridge [0604]: Intel Corporation 7500/5520/5500/X58 I/O Hub 
PCI Express Root Port 9 [8086:3410] (rev 13)
00:14.0 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub System 
Management Registers [8086:342e] (rev 13)
00:14.1 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub GPIO 
and Scratch Pad Registers [8086:3422] (rev 13)
00:14.2 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub Control 
Status and RAS Registers [8086:3423] (rev 13)
00:1a.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) 
USB UHCI Controller #4 [8086:3a37]
00:1a.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) 
USB2 EHCI Controller #2 [8086:3a3c]
00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI 
Express Root Port 1 [8086:3a40]
00:1c.4 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI 
Express Root Port 5 [8086:3a48]
00:1d.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) 
USB UHCI Controller #1 [8086:3a34]
00:1d.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) 
USB UHCI Controller #2 [8086:3a35]
00:1d.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) 
USB UHCI Controller #3 [8086:3a36]
00:1d.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) 
USB2 EHCI Controller #1 [8086:3a3a]
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge 
[8086:244e] (rev 90)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIR (ICH10R) LPC 
Interface Controller [8086:3a16]
00:1f.2 SATA controller [0106]: Intel Corporation 82801JI (ICH10 Family) 
SATA AHCI Controller [8086:3a22]
02:00.0 VGA compatible controller [0300]: Matrox Electronics Systems 
Ltd. MGA G200e [Pilot] ServerEngines (SEP1) [102b:0522] (rev 02)
06:00.0 Serial Attached SCSI controller [0107]: LSI Logic / Symbios 
Logic SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] [1000:0072] (rev 03)
07:00.0 Ethernet controller [0200]: Intel Corporation 82576 Gigabit 
Network Connection [8086:10c9] (rev 01)
07:00.1 Ethernet controller [0200]: Intel Corporation 82576 Gigabit 
Network Connection [8086:10c9] (rev 01)

(my storage controller there is the device 06:00.0, a LSI Logic SAS2008 
chip, which is actually on a LSI 9211-8i card).



-- 
john r pierce, recycling bits in santa cruz