On 10/27/2016 09:43 AM, Alessandro Baggi wrote: > Il 27/10/2016 13:58, Leonard den Ottolander ha scritto: >> Hi, >> >> On Thu, 2016-10-27 at 11:25 +0200, Alessandro Baggi wrote: >>> === START OF READ SMART DATA SECTION === >>> SMART overall-health self-assessment test result: PASSED >> That's the line you are looking for. Since your disk apparently does not >> store an error log - not sure if that's something with SSDs in general >> or just with this particular disk - you will always have to invoke >> >> smartctl -t short /dev/sda >> >> and then after the test has completed check the output of >> >> smartctl -a /dev/sda >> >> for that particular line. Shouldn't be too hard to put in a cron job, >> just make sure the job waits long enough (more than 1 minute, make it 2 >> to be sure) with reading the output of smartctl -a after invoking >> smartctl -t short. >> >> Regards, >> Leonard. >> You can also use the service smartd and edit the smartd.conf file and it have it send you emails when a disk starts to fail. > thank you for suggestion. > > Alessandro. > _______________________________________________ > CentOS mailing list > CentOS at centos.org > https://lists.centos.org/mailman/listinfo/centos > -- Stephen Clark *NetWolves Managed Services, LLC.* Director of Technology Phone: 813-579-3200 Fax: 813-882-0209 Email: steve.clark at netwolves.com http://www.netwolves.com