[CentOS] Virtualization Networking

[TE Dukes]

> -----Original Message-----
> From: centos-bounces at centos.org [mailto:centos-bounces at centos.org] On
> Behalf Of Gordon Messmer
> Sent: Tuesday, October 4, 2016 2:47 AM
> To: CentOS mailing list
> Subject: Re: [CentOS] Virtualization Networking
> 
> On 10/03/2016 07:00 PM, TE Dukes wrote:
> > /etc/sysconfig/ifcfg-eth1
> > GATEWAY=192.168.1.1
> ...
> > /etc/sysconfig/ifcfg-lo
> > GATEWAY=192.168.1.1
> 
> Don't specify GATEWAY in interface files where it isn't used.  This should
be
> set on eth0 only.
> 
> > # brctl show
> >
> > bridge name	bridge id		STP enabled	interfaces
> 
> OK, so you don't have a bridge interface.  If you want to access guest VMs
> from the LAN, you need to set one up.  Refer to the documentation I sent
> earlier.  You'll create a bridge interface configuration, and the move the
IP
> configuration from whichever ethX device you want to enslave to the
bridge.
> The ethX configuration file, then, won't have any IP configuration
specified,
> instead it'll contain "BRIDGE=br0".
> 

I did. I disabled NetworkManager and created one. Its not there now because
I have started over so many times.

Thanks